lkml.org 
[lkml]   [2017]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: n900 in next-20170901
On Tue, Sep 05, 2017 at 01:13:15PM -0700, Tony Lindgren wrote:
> * Pavel Machek <pavel@ucw.cz> [170903 13:38]:
> > Hi!
> >
> > It compiles ok, but it hangs on boot; black screen, so sometime before
> > display is initialized.
>
> Thanks for reporting it. Based on git bisect, the regression causing
> commit is 9caf25f996e8 ("mm/cma: manage the memory of the CMA area
> by using the ZONE_MOVABLE"). With this path applied, booting hangs
> with an error in omap3_save_secure_ram_context() after a call to
> _omap_save_secure_sram() that calls the related assembly code
> save_secure_ram_context.
>
> However, looks like there is also some other commit causing issue.
>
> Just reverting 9caf25f996e8 on Linux next causes the oops below.
>
> Anybody got ideas why this now happens?
>
> Regards,
>
> Tony
>
> 8< --------------------
> Unable to handle kernel paging request at virtual address ce800000
> pgd = c0004000 [ce800000] *pgd=00000000
> Internal error: Oops: 805 [#1] SMP ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-next-20170905+ #662
> Hardware name: Nokia RX-51 board
> task: ce0a0040 task.stack: ce0a4000
> PC is at __memzero+0x24/0x7c
> LR is at 0x0
> pc : [<c084fa84>] lr : [<00000000>] psr: 20000013
> sp : ce0a5e84 ip : 00000000 fp : c0c005a8
> r10: 00040000 r9 : cfc95000 r8 : 00000247
> r7 : ce0a5ef4 r6 : 00000000 r5 : 00000001 r4 : ce800000
> r3 : 00000000 r2 : 00000000 r1 : 0003ffc0 r0 : ce800000
> Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> Control: 10c5387d Table: 80004019 DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0xce0a4218)
> Stack: (0xce0a5e84 to 0xce0a6000)
> 5e80: c0116718 00000040 00000006 c01a1470 00040000 00000001 00000040
> 5ea0: ce0a5ef4 00000247 cfc95000 00000000 c0c005a8 c0116844 c0dce000 c01a1484
> 5ec0: 00000247 c0d0e2e0 c0dce29c c0b5cbbc c0dce000 00000003 c0c5389c c0c06c54
> 5ee0: c0c06bd8 00000001 00000000 014000c0 00000000 c0b5cbbc ffffe000 c0c06bd8
> 5f00: 00000000 c0101ef8 000000aa 00000000 cfdfcbdb cfdfcbe7 c0b5d904 000000aa
> 5f20: 000000aa c015cf54 c0b5cbbc 00000000 00000002 00000002 cfdfcbe7 cfdfcbec
> 5f40: c0c6c59c 00000002 c0dce000 c0c53880 c0c6c66c c0dce000 c0c53884 c0dce000
> 5f60: 00000003 c0c00ecc 00000002 00000002 00000000 c0c005a8 c0864f3c 000000aa
> 5f80: 00000000 00000000 c0864f3c 00000000 00000000 00000000 00000000 00000000
> 5fa0: 00000000 c0864f44 00000000 c0107e98 00000000 00000000 00000000 00000000
> 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
> [<c084fa84>] (__memzero) from [<c0116718>] (__dma_clear_buffer+0x140/0x154)
> [<c0116718>] (__dma_clear_buffer) from [<c0116844>] (__alloc_from_contiguous+0x50/0xdc)
> [<c0116844>] (__alloc_from_contiguous) from [<c0c06c54>] (atomic_pool_init+0x7c/0x178)
> [<c0c06c54>] (atomic_pool_init) from [<c0101ef8>] (do_one_initcall+0x3c/0x170)
> [<c0101ef8>] (do_one_initcall) from [<c0c00ecc>] (kernel_init_freeable+0x1fc/0x2c4)
> [<c0c00ecc>] (kernel_init_freeable) from [<c0864f44>] (kernel_init+0x8/0x110)
> [<c0864f44>] (kernel_init) from [<c0107e98>] (ret_from_fork+0x14/0x3c)
> Code: e52de004 e1a0c002 e1a0e002 e2511040 (a8a0500c)

Hello,

I think that I made a mistake for configuration CONFIG_HIGHMEM=y and
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y. In this case, the MOVABLE_ZONE can
be *!highmem*. Could you check that your configuration have above
options?

And, could you check that following patch works for you?

Thanks.

------------>8-----------------
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 38f0fde..4c39c92 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -518,7 +518,7 @@ void __init dma_contiguous_remap(void)
* considered as highmem even if it's physical address belong
* to lowmem. Therefore, re-mapping isn't required.
*/
- if (!IS_ENABLED(CONFIG_HIGHMEM))
+ if (!is_highmem_idx(ZONE_MOVABLE))
iotable_init(&map, 1);
}
}
\
 
 \ /
  Last update: 2017-09-06 01:32    [W:0.321 / U:1.288 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site