lkml.org 
[lkml]   [2017]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 1/2] ASoC: rt5514: Add devicetree bindings for rt5514-spi
On Tue, Sep 05, 2017 at 12:24:59PM +0800, Jeffy Chen wrote:
> Add devicetree bindings documentation file for rt5514 spi dsp codec.
>
> Also update rt5514 i2c dt-binding's compatible.

You should probably describe *why*?

> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> ---
>
> Changes in v8: None
>
> .../devicetree/bindings/sound/rt5514-spi.txt | 32 ++++++++++++++++++++++
> Documentation/devicetree/bindings/sound/rt5514.txt | 2 +-
> 2 files changed, 33 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/sound/rt5514-spi.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/rt5514-spi.txt b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
> new file mode 100644
> index 000000000000..8a63d9423dd9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/rt5514-spi.txt
> @@ -0,0 +1,32 @@
> +RT5514 SPI audio CODEC
> +
> +This device supports SPI only.
> +
> +Required properties:
> +
> +- compatible : "realtek,rt5514".

You list one string here, but there's 2 in the example. The point of
this exercise was to document (not just in an Example) the strings
you're using.

> +
> +- reg : The SPI address of the device.
> +
> +Optional properties:
> +
> +- interrupt-parent: Should be the phandle for the interrupt controller
> +- interrupts: The interrupt number to the cpu. The interrupt specifier format
> + depends on the interrupt controller.
> +
> +Example:
> +
> +codec: rt5514-spi@0 {
> + compatible = "realtek,rt5514", "realtek,rt5514-spi";
> + reg = <0>;
> +
> + /* May run faster once verified. */

Really? That was barely useful in the rk3399-gru DTSI, but it's
definitely not worth sticking in an example.

Also, you switch between tabs and spaces for indentation. Please be
consistent. (And as with C code, I think the right answer is tabs?)

> + spi-max-frequency = <10000000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mic_int>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
> + wakeup-source;
> +};
> diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
> index 929ca6756b02..12a8c93a67cc 100644
> --- a/Documentation/devicetree/bindings/sound/rt5514.txt
> +++ b/Documentation/devicetree/bindings/sound/rt5514.txt
> @@ -28,6 +28,6 @@ Pins on the device (for linking into audio routes) for RT5514:
> Example:
>
> codec: rt5514@57 {
> - compatible = "realtek,rt5514";
> + compatible = "realtek,rt5514", "realtek,rt5514-i2c";

Example != Documentation. Please document the string properly.

Brian

> reg = <0x57>;
> };
> --
> 2.11.0
>
>

\
 
 \ /
  Last update: 2017-09-05 19:56    [W:0.042 / U:3.904 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site