lkml.org 
[lkml]   [2017]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] iio: ad7793: Fix the serial interface reset
Date
The serial interface can be reset by writing 32 consecutive 1s to the device.
'ret' was initialized correctly but its value was overwritten when
ad7793_check_platform_data() was called. Since a dedicated reset function
is present now, it should be used instead.

Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
---
drivers/iio/adc/ad7793.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index e6706a09e100..47c3d7f32900 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -257,7 +257,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
unsigned int vref_mv)
{
struct ad7793_state *st = iio_priv(indio_dev);
- int i, ret = -1;
+ int i, ret;
unsigned long long scale_uv;
u32 id;

@@ -266,7 +266,7 @@ static int ad7793_setup(struct iio_dev *indio_dev,
return ret;

/* reset the serial interface */
- ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
+ ret = ad_sd_reset(&st->sd, 32);
if (ret < 0)
goto out;
usleep_range(500, 2000); /* Wait for at least 500us */
--
2.11.0
\
 
 \ /
  Last update: 2017-09-05 14:16    [W:0.039 / U:5.332 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site