lkml.org 
[lkml]   [2017]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 04/11] usb: xhci: Add Intel cherrytrail extended cap / otg phy mux handling
From
Date
Hi,

On 04-09-17 09:31, Heikki Krogerus wrote:
> Hi,
>
> On Fri, Sep 01, 2017 at 11:48:38PM +0200, Hans de Goede wrote:
>> The Intel cherrytrail xhci controller has an extended cap mmio-range
>> which contains registers to control the muxing to the xhci (host mode)
>> or the dwc3 (device mode) and vbus-detection for the otg usb-phy.
>>
>> Having a mux driver included in the xhci code (or under drivers/usb/host)
>> is not desirable. So this commit adds a simple handler for this extended
>> capability, which creates a platform device with the caps mmio region as
>> resource, this allows us to write a separate platform mux driver for the
>> mux.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>> -Check xHCI controller PCI device-id instead of only checking for the
>> Intel Extended capability ID, as the Extended capability ID is used on
>> other model Intel xHCI controllers too
>> ---
>> drivers/usb/host/Makefile | 2 +-
>> drivers/usb/host/xhci-intel-quirks.c | 85 ++++++++++++++++++++++++++++++++++++
>> drivers/usb/host/xhci-pci.c | 4 ++
>> drivers/usb/host/xhci.h | 2 +
>> 4 files changed, 92 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/usb/host/xhci-intel-quirks.c
>>
>> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
>> index cf2691fffcc0..441edf82eb1c 100644
>> --- a/drivers/usb/host/Makefile
>> +++ b/drivers/usb/host/Makefile
>> @@ -63,7 +63,7 @@ obj-$(CONFIG_USB_OHCI_HCD_DAVINCI) += ohci-da8xx.o
>> obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
>> obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
>> obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
>> -obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
>> +obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o xhci-intel-quirks.o
>> obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
>> obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
>> obj-$(CONFIG_USB_XHCI_TEGRA) += xhci-tegra.o
>> diff --git a/drivers/usb/host/xhci-intel-quirks.c b/drivers/usb/host/xhci-intel-quirks.c
>> new file mode 100644
>> index 000000000000..819f5f9da9ee
>> --- /dev/null
>> +++ b/drivers/usb/host/xhci-intel-quirks.c
>> @@ -0,0 +1,85 @@
>> +/*
>> + * Intel Vendor Defined XHCI extended capability handling
>> + *
>> + * Copyright (c) 2016) Hans de Goede <hdegoede@redhat.com>
>> + *
>> + * Loosely based on android x86 kernel code which is:
>> + *
>> + * Copyright (C) 2014 Intel Corp.
>> + *
>> + * Author: Wu, Hao
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
>> + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
>> + * for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program;
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +#include "xhci.h"
>> +
>> +/* Extended capability IDs for Intel Vendor Defined */
>> +#define XHCI_EXT_CAPS_INTEL_HOST_CAP 192
>> +
>> +static void xhci_intel_unregister_pdev(void *arg)
>> +{
>> + platform_device_unregister(arg);
>> +}
>> +
>> +int xhci_create_intel_cht_mux_pdev(struct xhci_hcd *xhci)
>> +{
>> + struct usb_hcd *hcd = xhci_to_hcd(xhci);
>> + struct device *dev = hcd->self.controller;
>> + struct platform_device *pdev;
>> + struct resource res = { 0, };
>> + int ret, ext_offset;
>> +
>> + ext_offset = xhci_find_next_ext_cap(&xhci->cap_regs->hc_capbase, 0,
>> + XHCI_EXT_CAPS_INTEL_HOST_CAP);
>> + if (!ext_offset) {
>> + xhci_err(xhci, "couldn't find Intel ext caps\n");
>> + return -ENODEV;
>> + }
>> +
>> + pdev = platform_device_alloc("intel_cht_usb_mux", PLATFORM_DEVID_NONE);
>> + if (!pdev) {
>> + xhci_err(xhci, "couldn't allocate intel_cht_usb_mux pdev\n");
>> + return -ENOMEM;
>> + }
>> +
>> + res.start = hcd->rsrc_start + ext_offset;
>> + res.end = res.start + 0x3ff;
>> + res.name = "intel_cht_usb_mux";
>> + res.flags = IORESOURCE_MEM;
>> +
>> + ret = platform_device_add_resources(pdev, &res, 1);
>> + if (ret) {
>> + dev_err(dev, "couldn't add resources to intel_cht_usb_mux pdev\n");
>> + platform_device_put(pdev);
>> + return ret;
>> + }
>
> Previously the problem with this was that since platform bus reserves
> the memory region, usb core fails to register the hcd, as it also
> wants to reserve the same memory region. So xhci with this failed to
> probe.
>
> So has that been fixed? Does xhci really get registered with this?

This is not a problem if you set the xhci device as parent:

>> + pdev->dev.parent = dev;

And yes both the xhci and the intel_cht_usb_mux devices get registered
and work fine:

[root@localhost ~]# cat /proc/iomem
<snip>
80000000-dfffffff : PCI Bus 0000:00
<snip>
a1c00000-a1c0ffff : 0000:00:14.0
a1c00000-a1c0ffff : xhci-hcd
a1c08070-a1c0846f : intel_cht_usb_mux

[root@localhost ~]# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
|__ Port 4: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/7p, 480M
|__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 3: Dev 3, If 1, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 3: Dev 3, If 2, Class=Vendor Specific Class, Driver=btusb, 12M
|__ Port 3: Dev 3, If 3, Class=Application Specific Interface, Driver=, 12M


>> +
>> + ret = platform_device_add(pdev);
>> + if (ret) {
>> + dev_err(dev, "couldn't register intel_cht_usb_mux pdev\n");
>> + platform_device_put(pdev);
>> + return ret;
>> + }
>> +
>> + ret = devm_add_action_or_reset(dev, xhci_intel_unregister_pdev, pdev);
>> + if (ret) {
>> + dev_err(dev, "couldn't add unregister action for intel_cht_usb_mux pdev\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
>> index 8071c8fdd15e..b55c1e96abf0 100644
>> --- a/drivers/usb/host/xhci-pci.c
>> +++ b/drivers/usb/host/xhci-pci.c
>> @@ -188,6 +188,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
>> if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
>> pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
>> xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
>> + xhci->quirks |= XHCI_INTEL_CHT_USB_MUX;
>> }
>> if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
>> (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
>> @@ -328,6 +329,9 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
>> if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
>> xhci_pme_acpi_rtd3_enable(dev);
>>
>> + if (xhci->quirks & XHCI_INTEL_CHT_USB_MUX)
>> + xhci_create_intel_cht_mux_pdev(xhci);
>> +
>> /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
>> pm_runtime_put_noidle(&dev->dev);
>>
>> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
>> index e3e935291ed6..f722ee31e50d 100644
>> --- a/drivers/usb/host/xhci.h
>> +++ b/drivers/usb/host/xhci.h
>> @@ -1821,6 +1821,7 @@ struct xhci_hcd {
>> #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
>> #define XHCI_U2_DISABLE_WAKE (1 << 27)
>> #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
>> +#define XHCI_INTEL_CHT_USB_MUX (1 << 29)
>
> Is that really necessary? Why not just register the platform device
> the moment we find match for the PCI device ID?

That is possible, but not how the rest of the xhci-pci.c code
works in general, all PCI-id checking is done in xhci_pci_quirks()
and that function only sets quirks flags otherwise and then those
quirks are handled in various other places such as probe() so
without adding this flag one would get a PCI-id check outside
of xhci_pci_quirks() or code which does more then just setting
a quirk flag inside of xhci_pci_quirks(), either of which deviates
from the current code-patterns for the xhci code.

Regards,

Hans



>
> Br,
>

\
 
 \ /
  Last update: 2017-09-05 12:07    [W:0.082 / U:0.208 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site