lkml.org 
[lkml]   [2017]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[GIT pull] timer updates for 4.14
Linus,

please pull the latest timers-core-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-core-for-linus

A rather small update for the time(r) subsystem:

- A new clocksource driver IMX-TPM

- Minor fixes to the alarmtimer facility

- Device tree cleanups for Renesas drivers

- A new kselftest and fixes for the timer related tests

- Conversion of the clocksource drivers to use %pOF

- Use the proper helpers to access rlimits in the posix-cpu-timer code.

Thanks,

tglx

------------------>
Alexandre Belloni (1):
alarmtimer: Ensure RTC module is not unloaded

Dong Aisheng (2):
dt-bindings: timer: Add nxp tpm timer binding doc
clocksource/drivers/imx-tpm: Add imx tpm timer support

Geert Uytterhoeven (1):
alarmtimer: Fix unavailable wake-up source in sysfs

Greg Hackmann (2):
kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
kselftests: timers: set-timer-lat: Add one-shot timer test cases

John Stultz (2):
kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
kselftests: timers: freq-step: Fix build warning

Krzysztof Opasiak (1):
posix-cpu-timers: Use dedicated helper to access rlimit values

Magnus Damm (6):
devicetree: bindings: Remove sh7372 CMT binding
devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
devicetree: bindings: Deprecate property, update example
devicetree: bindings: Remove unused 32-bit CMT bindings
devicetree: bindings: Remove deprecated properties

Markus Elfring (1):
clocksource/drivers/bcm2835: Remove message for a memory allocation failure

Rob Herring (1):
clocksource: Convert to using %pOF instead of full_name

Stafford Horne (1):
timekeeping: Use proper timekeeper for debug code


.../devicetree/bindings/timer/nxp,tpm-timer.txt | 28 +++
.../devicetree/bindings/timer/renesas,cmt.txt | 73 +++----
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/bcm2835_timer.c | 1 -
drivers/clocksource/tango_xtal.c | 6 +-
drivers/clocksource/timer-imx-tpm.c | 239 +++++++++++++++++++++
drivers/clocksource/timer-of.c | 11 +-
drivers/clocksource/timer-probe.c | 3 +-
drivers/clocksource/timer-stm32.c | 8 +-
kernel/time/alarmtimer.c | 17 +-
kernel/time/posix-cpu-timers.c | 14 +-
kernel/time/timekeeping.c | 2 +-
tools/testing/selftests/timers/freq-step.c | 8 +-
tools/testing/selftests/timers/set-timer-lat.c | 103 +++++++--
15 files changed, 439 insertions(+), 83 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
create mode 100644 drivers/clocksource/timer-imx-tpm.c

diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
new file mode 100644
index 000000000000..b4aa7ddb5b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
@@ -0,0 +1,28 @@
+NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+The Timer/PWM Module (TPM) supports input capture, output compare,
+and the generation of PWM signals to control electric motor and power
+management applications. The counter, compare and capture registers
+are clocked by an asynchronous clock that can remain enabled in low
+power modes. TPM can support global counter bus where one TPM drives
+the counter bus for the others, provided bit width is the same.
+
+Required properties:
+
+- compatible : should be "fsl,imx7ulp-tpm"
+- reg : Specifies base physical address and size of the register sets
+ for the clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain
+ an entry for each entry in clock-names.
+- clock-names : Must include the following entries: "igp" and "per".
+
+Example:
+tpm5: tpm@40260000 {
+ compatible = "fsl,imx7ulp-tpm";
+ reg = <0x40260000 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+ <&clks IMX7ULP_CLK_LPTPM5>;
+ clock-names = "ipg", "per";
+};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index 1a05c1b243c1..6ca6b9e582a0 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -12,46 +12,29 @@ datasheets.
Required Properties:

- compatible: must contain one or more of the following:
- - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT
- (CMT0)
- - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT
- (CMT0)
- - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT
- (CMT0)
- - "renesas,cmt-32" for all 32-bit CMT without fast clock support
- (CMT0 on sh7372, sh73a0 and r8a7740)
- This is a fallback for the above renesas,cmt-32-* entries.
-
- - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast
- clock support (CMT[234])
- - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast
- clock support (CMT[234])
- - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast
- clock support (CMT[234])
- - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support
- (CMT[234] on sh7372, sh73a0 and r8a7740)
- This is a fallback for the above renesas,cmt-32-fast-* entries.
-
- - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT
- (CMT1)
- "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
(CMT1)
- "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
(CMT1)
- "renesas,cmt-48" for all non-second generation 48-bit CMT
- (CMT1 on sh7372, sh73a0 and r8a7740)
+ (CMT1 on sh73a0 and r8a7740)
This is a fallback for the above renesas,cmt-48-* entries.

- - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
- (CMT[01])
- - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
- (CMT[01])
- - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT
- (CMT[01])
- - "renesas,cmt-48-gen2" for all second generation 48-bit CMT
- (CMT[01] on r8a73a4, r8a7790 and r8a7791)
- This is a fallback for the renesas,cmt-48-r8a73a4,
- renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries.
+ - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4.
+ - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4.
+ - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790.
+ - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790.
+ - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791.
+ - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791.
+ - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793.
+ - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793.
+ - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794.
+ - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794.
+
+ - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2.
+ - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2.
+ These are fallbacks for r8a73a4 and all the R-Car Gen2
+ entries listed above.

- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
@@ -59,21 +42,29 @@ Required Properties:
in clock-names.
- clock-names: must contain "fck" for the functional clock.

- - renesas,channels-mask: bitmask of the available channels.

-
-Example: R8A7790 (R-Car H2) CMT0 node
-
- CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
- them channels 0 and 1 in the documentation.
+Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes

cmt0: timer@ffca0000 {
- compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+ compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0";
reg = <0 0xffca0000 0 0x1004>;
interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
<0 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
+ };

- renesas,channels-mask = <0x60>;
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+ clock-names = "fck";
};
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index fcae5ca6ac92..0a953fc45a0e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -598,6 +598,14 @@ config CLKSRC_IMX_GPT
depends on ARM && CLKDEV_LOOKUP
select CLKSRC_MMIO

+config CLKSRC_IMX_TPM
+ bool "Clocksource using i.MX TPM" if COMPILE_TEST
+ depends on ARM && CLKDEV_LOOKUP && GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
+ help
+ Enable this option to use IMX Timer/PWM Module (TPM) timer as
+ clocksource.
+
config CLKSRC_ST_LPC
bool "Low power clocksource found in the LPC" if COMPILE_TEST
select TIMER_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 6df949402dfc..dbc1ad14515e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
obj-$(CONFIG_CLKSRC_TANGO_XTAL) += tango_xtal.o
obj-$(CONFIG_CLKSRC_IMX_GPT) += timer-imx-gpt.o
+obj-$(CONFIG_CLKSRC_IMX_TPM) += timer-imx-tpm.o
obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o
obj-$(CONFIG_H8300_TMR8) += h8300_timer8.o
obj-$(CONFIG_H8300_TMR16) += h8300_timer16.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 82828d3a4739..39e489a96ad7 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -114,7 +114,6 @@ static int __init bcm2835_timer_init(struct device_node *node)

timer = kzalloc(sizeof(*timer), GFP_KERNEL);
if (!timer) {
- pr_err("Can't allocate timer struct\n");
ret = -ENOMEM;
goto err_iounmap;
}
diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c
index c4e1c2e6046f..6a8d9838ce33 100644
--- a/drivers/clocksource/tango_xtal.c
+++ b/drivers/clocksource/tango_xtal.c
@@ -26,13 +26,13 @@ static int __init tango_clocksource_init(struct device_node *np)

xtal_in_cnt = of_iomap(np, 0);
if (xtal_in_cnt == NULL) {
- pr_err("%s: invalid address\n", np->full_name);
+ pr_err("%pOF: invalid address\n", np);
return -ENXIO;
}

clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
- pr_err("%s: invalid clock\n", np->full_name);
+ pr_err("%pOF: invalid clock\n", np);
return PTR_ERR(clk);
}

@@ -43,7 +43,7 @@ static int __init tango_clocksource_init(struct device_node *np)
ret = clocksource_mmio_init(xtal_in_cnt, "tango-xtal", xtal_freq, 350,
32, clocksource_mmio_readl_up);
if (ret) {
- pr_err("%s: registration failed\n", np->full_name);
+ pr_err("%pOF: registration failed\n", np);
return ret;
}

diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
new file mode 100644
index 000000000000..21bffdcb2f20
--- /dev/null
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -0,0 +1,239 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define TPM_SC 0x10
+#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3)
+#define TPM_SC_CMOD_DIV_DEFAULT 0x3
+#define TPM_CNT 0x14
+#define TPM_MOD 0x18
+#define TPM_STATUS 0x1c
+#define TPM_STATUS_CH0F BIT(0)
+#define TPM_C0SC 0x20
+#define TPM_C0SC_CHIE BIT(6)
+#define TPM_C0SC_MODE_SHIFT 2
+#define TPM_C0SC_MODE_MASK 0x3c
+#define TPM_C0SC_MODE_SW_COMPARE 0x4
+#define TPM_C0V 0x24
+
+static void __iomem *timer_base;
+static struct clock_event_device clockevent_tpm;
+
+static inline void tpm_timer_disable(void)
+{
+ unsigned int val;
+
+ /* channel disable */
+ val = readl(timer_base + TPM_C0SC);
+ val &= ~(TPM_C0SC_MODE_MASK | TPM_C0SC_CHIE);
+ writel(val, timer_base + TPM_C0SC);
+}
+
+static inline void tpm_timer_enable(void)
+{
+ unsigned int val;
+
+ /* channel enabled in sw compare mode */
+ val = readl(timer_base + TPM_C0SC);
+ val |= (TPM_C0SC_MODE_SW_COMPARE << TPM_C0SC_MODE_SHIFT) |
+ TPM_C0SC_CHIE;
+ writel(val, timer_base + TPM_C0SC);
+}
+
+static inline void tpm_irq_acknowledge(void)
+{
+ writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS);
+}
+
+static struct delay_timer tpm_delay_timer;
+
+static inline unsigned long tpm_read_counter(void)
+{
+ return readl(timer_base + TPM_CNT);
+}
+
+static unsigned long tpm_read_current_timer(void)
+{
+ return tpm_read_counter();
+}
+
+static u64 notrace tpm_read_sched_clock(void)
+{
+ return tpm_read_counter();
+}
+
+static int __init tpm_clocksource_init(unsigned long rate)
+{
+ tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
+ tpm_delay_timer.freq = rate;
+ register_current_timer_delay(&tpm_delay_timer);
+
+ sched_clock_register(tpm_read_sched_clock, 32, rate);
+
+ return clocksource_mmio_init(timer_base + TPM_CNT, "imx-tpm",
+ rate, 200, 32, clocksource_mmio_readl_up);
+}
+
+static int tpm_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ unsigned long next, now;
+
+ next = tpm_read_counter();
+ next += delta;
+ writel(next, timer_base + TPM_C0V);
+ now = tpm_read_counter();
+
+ /*
+ * NOTE: We observed in a very small probability, the bus fabric
+ * contention between GPU and A7 may results a few cycles delay
+ * of writing CNT registers which may cause the min_delta event got
+ * missed, so we need add a ETIME check here in case it happened.
+ */
+ return (int)((next - now) <= 0) ? -ETIME : 0;
+}
+
+static int tpm_set_state_oneshot(struct clock_event_device *evt)
+{
+ tpm_timer_enable();
+
+ return 0;
+}
+
+static int tpm_set_state_shutdown(struct clock_event_device *evt)
+{
+ tpm_timer_disable();
+
+ return 0;
+}
+
+static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ tpm_irq_acknowledge();
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_tpm = {
+ .name = "i.MX7ULP TPM Timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_oneshot = tpm_set_state_oneshot,
+ .set_next_event = tpm_set_next_event,
+ .set_state_shutdown = tpm_set_state_shutdown,
+ .rating = 200,
+};
+
+static int __init tpm_clockevent_init(unsigned long rate, int irq)
+{
+ int ret;
+
+ ret = request_irq(irq, tpm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+ "i.MX7ULP TPM Timer", &clockevent_tpm);
+
+ clockevent_tpm.cpumask = cpumask_of(0);
+ clockevent_tpm.irq = irq;
+ clockevents_config_and_register(&clockevent_tpm,
+ rate, 300, 0xfffffffe);
+
+ return ret;
+}
+
+static int __init tpm_timer_init(struct device_node *np)
+{
+ struct clk *ipg, *per;
+ int irq, ret;
+ u32 rate;
+
+ timer_base = of_iomap(np, 0);
+ if (!timer_base) {
+ pr_err("tpm: failed to get base address\n");
+ return -ENXIO;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ pr_err("tpm: failed to get irq\n");
+ ret = -ENOENT;
+ goto err_iomap;
+ }
+
+ ipg = of_clk_get_by_name(np, "ipg");
+ per = of_clk_get_by_name(np, "per");
+ if (IS_ERR(ipg) || IS_ERR(per)) {
+ pr_err("tpm: failed to get igp or per clk\n");
+ ret = -ENODEV;
+ goto err_clk_get;
+ }
+
+ /* enable clk before accessing registers */
+ ret = clk_prepare_enable(ipg);
+ if (ret) {
+ pr_err("tpm: ipg clock enable failed (%d)\n", ret);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(per);
+ if (ret) {
+ pr_err("tpm: per clock enable failed (%d)\n", ret);
+ goto err_per_clk_enable;
+ }
+
+ /*
+ * Initialize tpm module to a known state
+ * 1) Counter disabled
+ * 2) TPM counter operates in up counting mode
+ * 3) Timer Overflow Interrupt disabled
+ * 4) Channel0 disabled
+ * 5) DMA transfers disabled
+ */
+ writel(0, timer_base + TPM_SC);
+ writel(0, timer_base + TPM_CNT);
+ writel(0, timer_base + TPM_C0SC);
+
+ /* increase per cnt, div 8 by default */
+ writel(TPM_SC_CMOD_INC_PER_CNT | TPM_SC_CMOD_DIV_DEFAULT,
+ timer_base + TPM_SC);
+
+ /* set MOD register to maximum for free running mode */
+ writel(0xffffffff, timer_base + TPM_MOD);
+
+ rate = clk_get_rate(per) >> 3;
+ ret = tpm_clocksource_init(rate);
+ if (ret)
+ goto err_per_clk_enable;
+
+ ret = tpm_clockevent_init(rate, irq);
+ if (ret)
+ goto err_per_clk_enable;
+
+ return 0;
+
+err_per_clk_enable:
+ clk_disable_unprepare(ipg);
+err_clk_get:
+ clk_put(per);
+ clk_put(ipg);
+err_iomap:
+ iounmap(timer_base);
+ return ret;
+}
+TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init);
diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
index d509b500a7b5..64e00dd41e6f 100644
--- a/drivers/clocksource/timer-of.c
+++ b/drivers/clocksource/timer-of.c
@@ -52,7 +52,7 @@ static __init int timer_irq_init(struct device_node *np,
of_irq->irq = irq_of_parse_and_map(np, of_irq->index);
}
if (!of_irq->irq) {
- pr_err("Failed to map interrupt for %s\n", np->full_name);
+ pr_err("Failed to map interrupt for %pOF\n", np);
return -EINVAL;
}

@@ -63,8 +63,7 @@ static __init int timer_irq_init(struct device_node *np,
of_irq->flags ? of_irq->flags : IRQF_TIMER,
np->full_name, clkevt);
if (ret) {
- pr_err("Failed to request irq %d for %s\n", of_irq->irq,
- np->full_name);
+ pr_err("Failed to request irq %d for %pOF\n", of_irq->irq, np);
return ret;
}

@@ -88,20 +87,20 @@ static __init int timer_clk_init(struct device_node *np,
of_clk->clk = of_clk->name ? of_clk_get_by_name(np, of_clk->name) :
of_clk_get(np, of_clk->index);
if (IS_ERR(of_clk->clk)) {
- pr_err("Failed to get clock for %s\n", np->full_name);
+ pr_err("Failed to get clock for %pOF\n", np);
return PTR_ERR(of_clk->clk);
}

ret = clk_prepare_enable(of_clk->clk);
if (ret) {
- pr_err("Failed for enable clock for %s\n", np->full_name);
+ pr_err("Failed for enable clock for %pOF\n", np);
goto out_clk_put;
}

of_clk->rate = clk_get_rate(of_clk->clk);
if (!of_clk->rate) {
ret = -EINVAL;
- pr_err("Failed to get clock rate for %s\n", np->full_name);
+ pr_err("Failed to get clock rate for %pOF\n", np);
goto out_clk_disable;
}

diff --git a/drivers/clocksource/timer-probe.c b/drivers/clocksource/timer-probe.c
index da81e5de74fe..028075720334 100644
--- a/drivers/clocksource/timer-probe.c
+++ b/drivers/clocksource/timer-probe.c
@@ -40,8 +40,7 @@ void __init timer_probe(void)

ret = init_func_ret(np);
if (ret) {
- pr_err("Failed to initialize '%s': %d\n",
- of_node_full_name(np), ret);
+ pr_err("Failed to initialize '%pOF': %d\n", np, ret);
continue;
}

diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index 174d1243ea93..8f2423789ba9 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -138,7 +138,7 @@ static int __init stm32_clockevent_init(struct device_node *np)
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
ret = -EINVAL;
- pr_err("%s: failed to get irq.\n", np->full_name);
+ pr_err("%pOF: failed to get irq.\n", np);
goto err_get_irq;
}

@@ -168,12 +168,12 @@ static int __init stm32_clockevent_init(struct device_node *np)
ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
"stm32 clockevent", data);
if (ret) {
- pr_err("%s: failed to request irq.\n", np->full_name);
+ pr_err("%pOF: failed to request irq.\n", np);
goto err_get_irq;
}

- pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
- np->full_name, bits);
+ pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
+ np, bits);

return ret;

diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 0b8ff7d257ea..ec09ce9a6012 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -28,6 +28,7 @@
#include <linux/workqueue.h>
#include <linux/freezer.h>
#include <linux/compat.h>
+#include <linux/module.h>

#include "posix-timers.h"

@@ -56,9 +57,9 @@ static ktime_t freezer_delta;
static DEFINE_SPINLOCK(freezer_delta_lock);
#endif

+#ifdef CONFIG_RTC_CLASS
static struct wakeup_source *ws;

-#ifdef CONFIG_RTC_CLASS
/* rtc timer and device for setting alarm wakeups at suspend */
static struct rtc_timer rtctimer;
static struct rtc_device *rtcdev;
@@ -89,6 +90,7 @@ static int alarmtimer_rtc_add_device(struct device *dev,
{
unsigned long flags;
struct rtc_device *rtc = to_rtc_device(dev);
+ struct wakeup_source *__ws;

if (rtcdev)
return -EBUSY;
@@ -98,13 +100,25 @@ static int alarmtimer_rtc_add_device(struct device *dev,
if (!device_may_wakeup(rtc->dev.parent))
return -1;

+ __ws = wakeup_source_register("alarmtimer");
+
spin_lock_irqsave(&rtcdev_lock, flags);
if (!rtcdev) {
+ if (!try_module_get(rtc->owner)) {
+ spin_unlock_irqrestore(&rtcdev_lock, flags);
+ return -1;
+ }
+
rtcdev = rtc;
/* hold a reference so it doesn't go away */
get_device(dev);
+ ws = __ws;
+ __ws = NULL;
}
spin_unlock_irqrestore(&rtcdev_lock, flags);
+
+ wakeup_source_unregister(__ws);
+
return 0;
}

@@ -860,7 +874,6 @@ static int __init alarmtimer_init(void)
error = PTR_ERR(pdev);
goto out_drv;
}
- ws = wakeup_source_register("alarmtimer");
return 0;

out_drv:
diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
index a3bd5dbe0dc4..8585ad6e472a 100644
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -799,7 +799,6 @@ static void check_thread_timers(struct task_struct *tsk,
struct list_head *firing)
{
struct list_head *timers = tsk->cpu_timers;
- struct signal_struct *const sig = tsk->signal;
struct task_cputime *tsk_expires = &tsk->cputime_expires;
u64 expires;
unsigned long soft;
@@ -823,10 +822,9 @@ static void check_thread_timers(struct task_struct *tsk,
/*
* Check for the special case thread timers.
*/
- soft = READ_ONCE(sig->rlim[RLIMIT_RTTIME].rlim_cur);
+ soft = task_rlimit(tsk, RLIMIT_RTTIME);
if (soft != RLIM_INFINITY) {
- unsigned long hard =
- READ_ONCE(sig->rlim[RLIMIT_RTTIME].rlim_max);
+ unsigned long hard = task_rlimit_max(tsk, RLIMIT_RTTIME);

if (hard != RLIM_INFINITY &&
tsk->rt.timeout > DIV_ROUND_UP(hard, USEC_PER_SEC/HZ)) {
@@ -847,7 +845,8 @@ static void check_thread_timers(struct task_struct *tsk,
*/
if (soft < hard) {
soft += USEC_PER_SEC;
- sig->rlim[RLIMIT_RTTIME].rlim_cur = soft;
+ tsk->signal->rlim[RLIMIT_RTTIME].rlim_cur =
+ soft;
}
if (print_fatal_signals) {
pr_info("RT Watchdog Timeout (soft): %s[%d]\n",
@@ -938,11 +937,10 @@ static void check_process_timers(struct task_struct *tsk,
SIGPROF);
check_cpu_itimer(tsk, &sig->it[CPUCLOCK_VIRT], &virt_expires, utime,
SIGVTALRM);
- soft = READ_ONCE(sig->rlim[RLIMIT_CPU].rlim_cur);
+ soft = task_rlimit(tsk, RLIMIT_CPU);
if (soft != RLIM_INFINITY) {
unsigned long psecs = div_u64(ptime, NSEC_PER_SEC);
- unsigned long hard =
- READ_ONCE(sig->rlim[RLIMIT_CPU].rlim_max);
+ unsigned long hard = task_rlimit_max(tsk, RLIMIT_CPU);
u64 x;
if (psecs >= hard) {
/*
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index cedafa008de5..8f5866981883 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -2066,7 +2066,7 @@ void update_wall_time(void)
goto out;

/* Do some additional sanity checking */
- timekeeping_check_update(real_tk, offset);
+ timekeeping_check_update(tk, offset);

/*
* With NO_HZ we may have to accumulate many cycle_intervals
diff --git a/tools/testing/selftests/timers/freq-step.c b/tools/testing/selftests/timers/freq-step.c
index e8c61830825a..926828ea84d1 100644
--- a/tools/testing/selftests/timers/freq-step.c
+++ b/tools/testing/selftests/timers/freq-step.c
@@ -33,6 +33,10 @@
#define MAX_FREQ_ERROR 10e-6
#define MAX_STDDEV 1000e-9

+#ifndef ADJ_SETOFFSET
+ #define ADJ_SETOFFSET 0x0100
+#endif
+
struct sample {
double offset;
double time;
@@ -262,7 +266,7 @@ int main(int argc, char **argv)
set_frequency(0.0);

if (fails)
- ksft_exit_fail();
+ return ksft_exit_fail();

- ksft_exit_pass();
+ return ksft_exit_pass();
}
diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c
index 4fc98c5b0899..15434da23b04 100644
--- a/tools/testing/selftests/timers/set-timer-lat.c
+++ b/tools/testing/selftests/timers/set-timer-lat.c
@@ -20,6 +20,7 @@
*/


+#include <errno.h>
#include <stdio.h>
#include <unistd.h>
#include <time.h>
@@ -63,6 +64,7 @@ int alarmcount;
int clock_id;
struct timespec start_time;
long long max_latency_ns;
+int timer_fired_early;

char *clockstring(int clockid)
{
@@ -115,16 +117,23 @@ void sigalarm(int signo)
delta_ns -= NSEC_PER_SEC * TIMER_SECS * alarmcount;

if (delta_ns < 0)
- printf("%s timer fired early: FAIL\n", clockstring(clock_id));
+ timer_fired_early = 1;

if (delta_ns > max_latency_ns)
max_latency_ns = delta_ns;
}

-int do_timer(int clock_id, int flags)
+void describe_timer(int flags, int interval)
+{
+ printf("%-22s %s %s ",
+ clockstring(clock_id),
+ flags ? "ABSTIME":"RELTIME",
+ interval ? "PERIODIC":"ONE-SHOT");
+}
+
+int setup_timer(int clock_id, int flags, int interval, timer_t *tm1)
{
struct sigevent se;
- timer_t tm1;
struct itimerspec its1, its2;
int err;

@@ -136,8 +145,9 @@ int do_timer(int clock_id, int flags)

max_latency_ns = 0;
alarmcount = 0;
+ timer_fired_early = 0;

- err = timer_create(clock_id, &se, &tm1);
+ err = timer_create(clock_id, &se, tm1);
if (err) {
if ((clock_id == CLOCK_REALTIME_ALARM) ||
(clock_id == CLOCK_BOOTTIME_ALARM)) {
@@ -158,32 +168,97 @@ int do_timer(int clock_id, int flags)
its1.it_value.tv_sec = TIMER_SECS;
its1.it_value.tv_nsec = 0;
}
- its1.it_interval.tv_sec = TIMER_SECS;
+ its1.it_interval.tv_sec = interval;
its1.it_interval.tv_nsec = 0;

- err = timer_settime(tm1, flags, &its1, &its2);
+ err = timer_settime(*tm1, flags, &its1, &its2);
if (err) {
printf("%s - timer_settime() failed\n", clockstring(clock_id));
return -1;
}

- while (alarmcount < 5)
- sleep(1);
+ return 0;
+}

- printf("%-22s %s max latency: %10lld ns : ",
- clockstring(clock_id),
- flags ? "ABSTIME":"RELTIME",
- max_latency_ns);
+int check_timer_latency(int flags, int interval)
+{
+ int err = 0;
+
+ describe_timer(flags, interval);
+ printf("timer fired early: %7d : ", timer_fired_early);
+ if (!timer_fired_early) {
+ printf("[OK]\n");
+ } else {
+ printf("[FAILED]\n");
+ err = -1;
+ }
+
+ describe_timer(flags, interval);
+ printf("max latency: %10lld ns : ", max_latency_ns);

- timer_delete(tm1);
if (max_latency_ns < UNRESONABLE_LATENCY) {
printf("[OK]\n");
+ } else {
+ printf("[FAILED]\n");
+ err = -1;
+ }
+ return err;
+}
+
+int check_alarmcount(int flags, int interval)
+{
+ describe_timer(flags, interval);
+ printf("count: %19d : ", alarmcount);
+ if (alarmcount == 1) {
+ printf("[OK]\n");
return 0;
}
printf("[FAILED]\n");
return -1;
}

+int do_timer(int clock_id, int flags)
+{
+ timer_t tm1;
+ const int interval = TIMER_SECS;
+ int err;
+
+ err = setup_timer(clock_id, flags, interval, &tm1);
+ if (err)
+ return err;
+
+ while (alarmcount < 5)
+ sleep(1);
+
+ timer_delete(tm1);
+ return check_timer_latency(flags, interval);
+}
+
+int do_timer_oneshot(int clock_id, int flags)
+{
+ timer_t tm1;
+ const int interval = 0;
+ struct timeval timeout;
+ fd_set fds;
+ int err;
+
+ err = setup_timer(clock_id, flags, interval, &tm1);
+ if (err)
+ return err;
+
+ memset(&timeout, 0, sizeof(timeout));
+ timeout.tv_sec = 5;
+ FD_ZERO(&fds);
+ do {
+ err = select(FD_SETSIZE, &fds, NULL, NULL, &timeout);
+ } while (err == -1 && errno == EINTR);
+
+ timer_delete(tm1);
+ err = check_timer_latency(flags, interval);
+ err |= check_alarmcount(flags, interval);
+ return err;
+}
+
int main(void)
{
struct sigaction act;
@@ -209,6 +284,8 @@ int main(void)

ret |= do_timer(clock_id, TIMER_ABSTIME);
ret |= do_timer(clock_id, 0);
+ ret |= do_timer_oneshot(clock_id, TIMER_ABSTIME);
+ ret |= do_timer_oneshot(clock_id, 0);
}
if (ret)
return ksft_exit_fail();
\
 
 \ /
  Last update: 2017-09-04 09:46    [W:0.077 / U:15.644 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site