lkml.org 
[lkml]   [2017]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] ASoC: codec: use enable pin to control dmic start and stop
From
Date


On Monday, September 04, 2017 06:03 PM, Arnaud Pouliquen wrote:
> Hello Lin,
>
> Sorry for this late answer.
> I'm not maintainer, just a contributor... but as some update seems
> strange for me, so i prefer to highlight it to clarify them.
>
> On 08/17/2017 04:24 AM, Lin Huang wrote:
>> From: huang lin <hl@rock-chips.com>
>>
>> on some board use enable pin to control dmic start and stop,
>> so add this feature in dmic driver.
> Please, Could you give data-sheet reference of your DMIC, to help me
> to understand your use-case?
>> Signed-off-by: Lin Huang <hl@rock-chips.com>
>> ---
>> sound/soc/codecs/Kconfig | 2 +-
>> sound/soc/codecs/dmic.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 47 insertions(+), 1 deletion(-)
>>
>> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
>> index 010811e..d98233b 100644
>> --- a/sound/soc/codecs/Kconfig
>> +++ b/sound/soc/codecs/Kconfig
>> @@ -71,7 +71,7 @@ config SND_SOC_ALL_CODECS
>> select SND_SOC_DA732X if I2C
>> select SND_SOC_DA9055 if I2C
>> select SND_SOC_DIO2125
>> - select SND_SOC_DMIC
>> + select SND_SOC_DMIC if GPIOLIB
> Dependency also for DMIC without GPIO to handle gating?
>> select SND_SOC_ES8316 if I2C
>> select SND_SOC_ES8328_SPI if SPI_MASTER
>> select SND_SOC_ES8328_I2C if I2C
>> diff --git a/sound/soc/codecs/dmic.c b/sound/soc/codecs/dmic.c
>> index 12e07f9..b88a1ee 100644
>> --- a/sound/soc/codecs/dmic.c
>> +++ b/sound/soc/codecs/dmic.c
>> @@ -19,6 +19,8 @@
>> *
>> */
>>
>> +#include <linux/gpio.h>
>> +#include <linux/gpio/consumer.h>
>> #include <linux/platform_device.h>
>> #include <linux/slab.h>
>> #include <linux/module.h>
>> @@ -27,6 +29,34 @@
>> #include <sound/soc.h>
>> #include <sound/soc-dapm.h>
>>
>> +static int dmic_daiops_trigger(struct snd_pcm_substream *substream,
>> + int cmd, struct snd_soc_dai *dai)
>> +{
>> + struct gpio_desc *dmic_en = snd_soc_dai_get_drvdata(dai);
>> +
>> + if (!dmic_en)
>> + return 0;
>> +
>> + switch (cmd) {
>> + case SNDRV_PCM_TRIGGER_START:
>> + case SNDRV_PCM_TRIGGER_RESUME:
>> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
>> + gpiod_set_value(dmic_en, 1);
>> + break;
>> + case SNDRV_PCM_TRIGGER_STOP:
>> + case SNDRV_PCM_TRIGGER_SUSPEND:
>> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
>> + gpiod_set_value(dmic_en, 0);
>> + break;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct snd_soc_dai_ops dmic_dai_ops = {
>> + .trigger = dmic_daiops_trigger,
>> +};
>> +
> should it be handle by trigger or DAPM?
>
>
>
>> static struct snd_soc_dai_driver dmic_dai = {
>> .name = "dmic-hifi",
>> .capture = {
>> @@ -38,8 +68,23 @@ static struct snd_soc_dai_driver dmic_dai = {
>> | SNDRV_PCM_FMTBIT_S24_LE
>> | SNDRV_PCM_FMTBIT_S16_LE,
>> },
>> + .ops = &dmic_dai_ops,
>> };
>>
>> +static int dmic_codec_probe(struct snd_soc_codec *codec)
>> +{
>> + struct gpio_desc *dmic_en;
>> +
>> + dmic_en = devm_gpiod_get_optional(codec->dev,
>> + "dmicen", GPIOD_OUT_LOW);
> Hypothesis here is that GPIO is always set to low? seems too limiting.
Yes, you are right, maybe i can set it to
devm_gpiod_get_optional(codec->dev, "dmicen", GPIOD_ASIS);
>
> Regards
> Arnaud
>> + if (IS_ERR(dmic_en))
>> + return PTR_ERR(dmic_en);
>> +
>> + snd_soc_codec_set_drvdata(codec, dmic_en);
>> +
>> + return 0;
>> +}
>> +
>> static const struct snd_soc_dapm_widget dmic_dapm_widgets[] = {
>> SND_SOC_DAPM_AIF_OUT("DMIC AIF", "Capture", 0,
>> SND_SOC_NOPM, 0, 0),
>> @@ -51,6 +96,7 @@ static const struct snd_soc_dapm_route intercon[] = {
>> };
>>
>> static const struct snd_soc_codec_driver soc_dmic = {
>> + .probe = dmic_codec_probe,
>> .component_driver = {
>> .dapm_widgets = dmic_dapm_widgets,
>> .num_dapm_widgets = ARRAY_SIZE(dmic_dapm_widgets),
>>
>
>


\
 
 \ /
  Last update: 2017-09-05 04:27    [W:0.827 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site