lkml.org 
[lkml]   [2017]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 2/3] Input: pwm-vibra: new driver
On Fri, Jul 14, 2017 at 12:01:50PM +0200, Sebastian Reichel wrote:
> Provide a simple driver for PWM controllable vibrators.
> It will be used by Motorola Droid 4.
>
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

Applied, thank you.

> ---
> drivers/input/misc/Kconfig | 12 ++
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/pwm-vibra.c | 267 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 280 insertions(+)
> create mode 100644 drivers/input/misc/pwm-vibra.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 3872488c3fd7..7bb7285c4722 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -581,6 +581,18 @@ config INPUT_PWM_BEEPER
> To compile this driver as a module, choose M here: the module will be
> called pwm-beeper.
>
> +config INPUT_PWM_VIBRA
> + tristate "PWM vibrator support"
> + depends on PWM
> + depends on INPUT_FF_MEMLESS
> + help
> + Say Y here to get support for PWM based vibrator devices.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called pwm-vibra.
> +
> config INPUT_GPIO_ROTARY_ENCODER
> tristate "Rotary encoders connected to GPIO pins"
> depends on GPIOLIB || COMPILE_TEST
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index b923a9828c88..36ea14997b40 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o
> obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o
> obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
> obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
> +obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o
> obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
> obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o
> obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
> diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
> new file mode 100644
> index 000000000000..55da191ae550
> --- /dev/null
> +++ b/drivers/input/misc/pwm-vibra.c
> @@ -0,0 +1,267 @@
> +/*
> + * PWM vibrator driver
> + *
> + * Copyright (C) 2017 Collabora Ltd.
> + *
> + * Based on previous work from:
> + * Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com>
> + *
> + * Based on PWM beeper driver:
> + * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/input.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +struct pwm_vibrator {
> + struct input_dev *input;
> + struct pwm_device *pwm;
> + struct pwm_device *pwm_dir;
> + struct regulator *vcc;
> +
> + struct work_struct play_work;
> + u16 level;
> + u32 direction_duty_cycle;
> +};
> +
> +static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
> +{
> + struct device *pdev = vibrator->input->dev.parent;
> + struct pwm_state state;
> + int err;
> +
> + err = regulator_enable(vibrator->vcc);
> + if (err) {
> + dev_err(pdev, "failed to enable regulator: %d", err);
> + return err;
> + }
> +
> + pwm_get_state(vibrator->pwm, &state);
> + pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff);
> + state.enabled = true;
> +
> + err = pwm_apply_state(vibrator->pwm, &state);
> + if (err) {
> + dev_err(pdev, "failed to apply pwm state: %d", err);
> + return err;
> + }
> +
> + if (vibrator->pwm_dir) {
> + pwm_get_state(vibrator->pwm_dir, &state);
> + state.duty_cycle = vibrator->direction_duty_cycle;
> + state.enabled = true;
> +
> + err = pwm_apply_state(vibrator->pwm_dir, &state);
> + if (err) {
> + dev_err(pdev, "failed to apply dir-pwm state: %d", err);
> + pwm_disable(vibrator->pwm);
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void pwm_vibrator_stop(struct pwm_vibrator *vibrator)
> +{
> + regulator_disable(vibrator->vcc);
> +
> + if (vibrator->pwm_dir)
> + pwm_disable(vibrator->pwm_dir);
> + pwm_disable(vibrator->pwm);
> +}
> +
> +static void pwm_vibrator_play_work(struct work_struct *work)
> +{
> + struct pwm_vibrator *vibrator = container_of(work,
> + struct pwm_vibrator, play_work);
> +
> + if (vibrator->level)
> + pwm_vibrator_start(vibrator);
> + else
> + pwm_vibrator_stop(vibrator);
> +}
> +
> +static int pwm_vibrator_play_effect(struct input_dev *dev, void *data,
> + struct ff_effect *effect)
> +{
> + struct pwm_vibrator *vibrator = input_get_drvdata(dev);
> +
> + vibrator->level = effect->u.rumble.strong_magnitude;
> + if (!vibrator->level)
> + vibrator->level = effect->u.rumble.weak_magnitude;
> +
> + schedule_work(&vibrator->play_work);
> +
> + return 0;
> +}
> +
> +static void pwm_vibrator_close(struct input_dev *input)
> +{
> + struct pwm_vibrator *vibrator = input_get_drvdata(input);
> +
> + cancel_work_sync(&vibrator->play_work);
> + pwm_vibrator_stop(vibrator);
> +}
> +
> +static int pwm_vibrator_probe(struct platform_device *pdev)
> +{
> + struct pwm_vibrator *vibrator;
> + struct pwm_state state;
> + int err;
> +
> + vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
> + if (!vibrator)
> + return -ENOMEM;
> +
> + vibrator->input = devm_input_allocate_device(&pdev->dev);
> + if (!vibrator->input)
> + return -ENOMEM;
> +
> + vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
> + err = PTR_ERR_OR_ZERO(vibrator->vcc);
> + if (err) {
> + if (err != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to request regulator: %d",
> + err);
> + return err;
> + }
> +
> + vibrator->pwm = devm_pwm_get(&pdev->dev, "enable");
> + err = PTR_ERR_OR_ZERO(vibrator->pwm);
> + if (err) {
> + if (err != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "Failed to request main pwm: %d",
> + err);
> + return err;
> + }
> +
> + INIT_WORK(&vibrator->play_work, pwm_vibrator_play_work);
> +
> + /* Sync up PWM state and ensure it is off. */
> + pwm_init_state(vibrator->pwm, &state);
> + state.enabled = false;
> + err = pwm_apply_state(vibrator->pwm, &state);
> + if (err) {
> + dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
> + err);
> + return err;
> + }
> +
> + vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction");
> + err = PTR_ERR_OR_ZERO(vibrator->pwm_dir);
> + switch (err) {
> + case 0:
> + /* Sync up PWM state and ensure it is off. */
> + pwm_init_state(vibrator->pwm_dir, &state);
> + state.enabled = false;
> + err = pwm_apply_state(vibrator->pwm_dir, &state);
> + if (err) {
> + dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
> + err);
> + return err;
> + }
> +
> + vibrator->direction_duty_cycle =
> + pwm_get_period(vibrator->pwm_dir) / 2;
> + device_property_read_u32(&pdev->dev, "direction-duty-cycle-ns",
> + &vibrator->direction_duty_cycle);
> + break;
> +
> + case -ENODATA:
> + /* Direction PWM is optional */
> + vibrator->pwm_dir = NULL;
> + break;
> +
> + default:
> + dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
> + /* Fall through */
> +
> + case -EPROBE_DEFER:
> + return err;
> + }
> +
> + vibrator->input->name = "pwm-vibrator";
> + vibrator->input->id.bustype = BUS_HOST;
> + vibrator->input->dev.parent = &pdev->dev;
> + vibrator->input->close = pwm_vibrator_close;
> +
> + input_set_drvdata(vibrator->input, vibrator);
> + input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
> +
> + err = input_ff_create_memless(vibrator->input, NULL,
> + pwm_vibrator_play_effect);
> + if (err) {
> + dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
> + return err;
> + }
> +
> + err = input_register_device(vibrator->input);
> + if (err) {
> + dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
> + return err;
> + }
> +
> + platform_set_drvdata(pdev, vibrator);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused pwm_vibrator_suspend(struct device *dev)
> +{
> + struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
> +
> + cancel_work_sync(&vibrator->play_work);
> + if (vibrator->level)
> + pwm_vibrator_stop(vibrator);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused pwm_vibrator_resume(struct device *dev)
> +{
> + struct pwm_vibrator *vibrator = dev_get_drvdata(dev);
> +
> + if (vibrator->level)
> + pwm_vibrator_start(vibrator);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops,
> + pwm_vibrator_suspend, pwm_vibrator_resume);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id pwm_vibra_dt_match_table[] = {
> + { .compatible = "pwm-vibrator" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table);
> +#endif
> +
> +static struct platform_driver pwm_vibrator_driver = {
> + .probe = pwm_vibrator_probe,
> + .driver = {
> + .name = "pwm-vibrator",
> + .pm = &pwm_vibrator_pm_ops,
> + .of_match_table = of_match_ptr(pwm_vibra_dt_match_table),
> + },
> +};
> +module_platform_driver(pwm_vibrator_driver);
> +
> +MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
> +MODULE_DESCRIPTION("PWM vibrator driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:pwm-vibrator");
> --
> 2.13.2
>

--
Dmitry

\
 
 \ /
  Last update: 2017-09-04 21:17    [W:0.537 / U:8.584 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site