lkml.org 
[lkml]   [2017]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 02/10] dmaengine: sun6i: Correct burst length field offsets for H3
Date
On Montag, 4. September 2017 09:59:24 CEST Maxime Ripard wrote:
> On Mon, Sep 04, 2017 at 12:40:53AM +0200, Stefan Brüns wrote:
> > For the H3, the burst lengths field offsets in the channel configuration
> > register differs from earlier SoC generations.
> >
> > Using the A31 register macros actually configured the H3 controller
> > do to bursts of length 1 always, which although working leads to higher
> > bus utilisation.
> >
> > Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
> > ---
> >
> > drivers/dma/sun6i-dma.c | 28 +++++++++++++++++++++-------
> > 1 file changed, 21 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> > index 1d9b3be30d22..f1a139f0102f 100644
> > --- a/drivers/dma/sun6i-dma.c
> > +++ b/drivers/dma/sun6i-dma.c
> > @@ -68,13 +68,15 @@
> >
> > #define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & 0x1f)
> > #define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)
> > #define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5)
> >
> > -#define DMA_CHAN_CFG_SRC_BURST(x) (((x) & 0x3) << 7)
> > +#define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7)
> > +#define DMA_CHAN_CFG_SRC_BURST_H3(x) (((x) & 0x3) << 6)
> >
> > #define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)
> >
> > #define DMA_CHAN_CFG_DST_DRQ(x) (DMA_CHAN_CFG_SRC_DRQ(x) << 16)
> > #define DMA_CHAN_CFG_DST_IO_MODE (DMA_CHAN_CFG_SRC_IO_MODE << 16)
> > #define DMA_CHAN_CFG_DST_LINEAR_MODE (DMA_CHAN_CFG_SRC_LINEAR_MODE << 16)
> >
> > -#define DMA_CHAN_CFG_DST_BURST(x) (DMA_CHAN_CFG_SRC_BURST(x) << 16)
> > +#define DMA_CHAN_CFG_DST_BURST_A31(x) (DMA_CHAN_CFG_SRC_BURST_A31(x) <<
> > 16) +#define DMA_CHAN_CFG_DST_BURST_H3(x) (DMA_CHAN_CFG_SRC_BURST_H3(x)
> > << 16)>
> > #define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
> >
> > #define DMA_CHAN_CUR_SRC 0x10
> >
> > @@ -554,11 +556,17 @@ static int set_config(struct sun6i_dma_dev *sdev,
> >
> > if (dst_width < 0)
> >
> > return dst_width;
> >
> > - *p_cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
> > - DMA_CHAN_CFG_SRC_WIDTH(src_width) |
> > - DMA_CHAN_CFG_DST_BURST(dst_burst) |
> > + *p_cfg = DMA_CHAN_CFG_SRC_WIDTH(src_width) |
> >
> > DMA_CHAN_CFG_DST_WIDTH(dst_width);
> >
> > + if (sdev->cfg->dmac_variant == DMAC_VARIANT_H3) {
> > + *p_cfg |= DMA_CHAN_CFG_SRC_BURST_H3(src_burst) |
> > + DMA_CHAN_CFG_DST_BURST_H3(dst_burst);
> > + } else {
> > + *p_cfg |= DMA_CHAN_CFG_SRC_BURST_A31(src_burst) |
> > + DMA_CHAN_CFG_DST_BURST_A31(dst_burst);
> > + }
> > +
>
> I guess we have two options to support that properly. We could either
> have a different function that would generate that register value
> based on the parameters we have, or duplicate the set_config function
> entirely, with function pointer stored in the configuration.
>
> I think I prefer the former, as it reduces the code duplication.

Duplicating "set_config" would also mean duplicating sun6i_dma_prep_dma_memcpy
- there are two hunks which change setting of the burst length register value.

A function pointer in the config would work.

Kind regards,

Stefan

\
 
 \ /
  Last update: 2017-09-04 16:47    [W:0.084 / U:12.352 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site