lkml.org 
[lkml]   [2017]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2
Date
Add nodes of thermal monitor and thermal zone for UniPhier PXs2 SoC.
The thermal monitor is included in sysctrl.
Furthermore, add cpuN labels for reference in cooling-device property.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
arch/arm/boot/dts/uniphier-pxs2.dtsi | 43 ++++++++++++++++++++++++++++++++----
1 file changed, 39 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 90b020c..c89e0d5 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -16,7 +16,7 @@
#address-cells = <1>;
#size-cells = <0>;

- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
@@ -24,9 +24,10 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};

- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
@@ -36,7 +37,7 @@
operating-points-v2 = <&cpu_opp>;
};

- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
@@ -46,7 +47,7 @@
operating-points-v2 = <&cpu_opp>;
};

- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
@@ -114,6 +115,34 @@
};
};

+ thermal-zones {
+ cpu_thermal {
+ polling-delay-passive = <250>; /* 250ms */
+ polling-delay = <1000>; /* 1000ms */
+ thermal-sensors = <&pvtctl>;
+
+ trips {
+ cpu_crit: cpu_crit {
+ temperature = <95000>; /* 95C */
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ cpu_alert: cpu_alert {
+ temperature = <85000>; /* 85C */
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map {
+ trip = <&cpu_alert>;
+ cooling-device = <&cpu0 (-1) (-1)>;
+ };
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -358,6 +387,12 @@
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
+
+ pvtctl: pvtctl {
+ compatible = "socionext,uniphier-pxs2-thermal";
+ interrupts = <0 3 4>;
+ #thermal-sensor-cells = <0>;
+ };
};

nand: nand@68000000 {
--
2.7.4
\
 
 \ /
  Last update: 2017-09-04 03:18    [W:0.048 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site