lkml.org 
[lkml]   [2017]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/7] ARM: dts: sunxi: Add dtsi for AXP81x PMIC
On Fri, Sep 29, 2017 at 4:32 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> Hi,
>
> On Fri, Sep 29, 2017 at 03:25:11AM +0000, Chen-Yu Tsai wrote:
>> The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs.
>> This includes the AXP813 and AXP818. There is no discernible difference
>> except the labeling. The AXP813 is paired with the A83T, while the
>> AXP818 is paired with the H8.
>>
>> This patch adds a dtsi file for all the common bindings for these two
>> PMICs. Currently this is just listing all the regulator nodes. The
>> regulators are initialized based on their device node names.
>>
>> In the future this would be expanded to include power supplies and
>> GPIO controllers.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>> arch/arm/boot/dts/axp81x.dtsi | 139 ++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 139 insertions(+)
>> create mode 100644 arch/arm/boot/dts/axp81x.dtsi
>>
>> diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
>> new file mode 100644
>> index 000000000000..73b761f850c5
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/axp81x.dtsi
>> @@ -0,0 +1,139 @@
>> +/*
>> + * Copyright 2017 Chen-Yu Tsai
>> + *
>> + * Chen-Yu Tsai <wens@csie.org>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/* AXP813/818 Integrated Power Management Chip */
>> +
>> +&axp81x {
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + regulators {
>> + /* Default work frequency for buck regulators */
>> + x-powers,dcdc-freq = <3000>;
>> +
>> + reg_dcdc1: dcdc1 {
>> + };
>
> Is there any reason not to add some default regulator names here?

The node names, and by extension, the drivers already provide default names.
regulator-name is not a required property either.

ChenYu

\
 
 \ /
  Last update: 2017-09-29 10:42    [W:0.054 / U:13.536 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site