lkml.org 
[lkml]   [2017]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 09/14] regmap: add iopoll-like polling macro for regmap_field
Date
This patch adds a macro regmap_field_read_poll_timeout that works
similar to the readx_poll_timeout defined in linux/iopoll.h, except
that this can also return the error value returned by a failed
regmap_field_read.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
include/linux/regmap.h | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 978abfbac617..93a4663d7acb 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -139,6 +139,45 @@ struct reg_sequence {
pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
})

+/**
+ * regmap_field_read_poll_timeout - Poll until a condition is met or timeout
+ *
+ * @field: Regmap field to read from
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ * tight-loops). Should be less than ~20ms since usleep_range
+ * is used (see Documentation/timers/timers-howto.txt).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val. Must not be called
+ * from atomic context if sleep_us or timeout_us are used.
+ *
+ * This is modelled after the readx_poll_timeout macros in linux/iopoll.h.
+ */
+#define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \
+({ \
+ ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+ int pollret; \
+ might_sleep_if(sleep_us); \
+ for (;;) { \
+ pollret = regmap_field_read((field), &(val)); \
+ if (pollret) \
+ break; \
+ if (cond) \
+ break; \
+ if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
+ pollret = regmap_field_read((field), &(val)); \
+ break; \
+ } \
+ if (sleep_us) \
+ usleep_range((sleep_us >> 2) + 1, sleep_us); \
+ } \
+ pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
#ifdef CONFIG_REGMAP

enum regmap_endian {
--
2.14.2
\
 
 \ /
  Last update: 2017-09-29 10:25    [W:0.142 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site