lkml.org 
[lkml]   [2017]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] mmc: dt-bindings: Add reg/source_cg/latch-ck for Mediatek MMC bindings
From
Date


On 09/22/2017 02:03 PM, Chaotian Jing wrote:
> Change the comptiable for support of multi-platform
> Add description for reg
> Add description for source_cg
> Add description for mediatek,latch-ck
> Note that source_cg and mediatek,latch-ck are optional for some projects,
> eg, MT2701 do not have source_cg, and MT2712 do not need
> mediatek,latch-ck
>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 4182ea3..b934a29 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
> and the properties used by the msdc driver.
>
> Required properties:
> -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> +- compatible: value should be either of the following.
> + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712

NAK, this has to be:
You have to add the fallback comatible ("mediatek,mt8135-mmc") to the binding
description as otherwise the driver does not get probed.

Regards,
Matthias

> +- reg: physical base address of the controller and length
> - interrupts: Should contain MSDC interrupt number
> -- clocks: MSDC source clock, HCLK
> -- clock-names: "source", "hclk"
> +- clocks: MSDC source clock, HCLK, source_cg
> +- clock-names: "source", "hclk", "source_cg"
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> @@ -30,6 +35,8 @@ Optional properties:
> - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> If present,HS400 command responses are sampled on rising edges.
> If not present,HS400 command responses are sampled on falling edges.
> +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
> + error caused by stop clock(fifo full)
>
> Examples:
> mmc0: mmc@11230000 {
>

\
 
 \ /
  Last update: 2017-09-29 13:12    [W:0.041 / U:5.720 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site