lkml.org 
[lkml]   [2017]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4/7] ARM: dts: sunxi: Add dtsi for AXP81x PMIC
    Date
    The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs.
    This includes the AXP813 and AXP818. There is no discernible difference
    except the labeling. The AXP813 is paired with the A83T, while the
    AXP818 is paired with the H8.

    This patch adds a dtsi file for all the common bindings for these two
    PMICs. Currently this is just listing all the regulator nodes. The
    regulators are initialized based on their device node names.

    In the future this would be expanded to include power supplies and
    GPIO controllers.

    Signed-off-by: Chen-Yu Tsai <wens@csie.org>
    ---
    arch/arm/boot/dts/axp81x.dtsi | 139 ++++++++++++++++++++++++++++++++++++++++++
    1 file changed, 139 insertions(+)
    create mode 100644 arch/arm/boot/dts/axp81x.dtsi

    diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
    new file mode 100644
    index 000000000000..73b761f850c5
    --- /dev/null
    +++ b/arch/arm/boot/dts/axp81x.dtsi
    @@ -0,0 +1,139 @@
    +/*
    + * Copyright 2017 Chen-Yu Tsai
    + *
    + * Chen-Yu Tsai <wens@csie.org>
    + *
    + * This file is dual-licensed: you can use it either under the terms
    + * of the GPL or the X11 license, at your option. Note that this dual
    + * licensing only applies to this file, and not this project as a
    + * whole.
    + *
    + * a) This file is free software; you can redistribute it and/or
    + * modify it under the terms of the GNU General Public License as
    + * published by the Free Software Foundation; either version 2 of the
    + * License, or (at your option) any later version.
    + *
    + * This file is distributed in the hope that it will be useful,
    + * but WITHOUT ANY WARRANTY; without even the implied warranty of
    + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    + * GNU General Public License for more details.
    + *
    + * Or, alternatively,
    + *
    + * b) Permission is hereby granted, free of charge, to any person
    + * obtaining a copy of this software and associated documentation
    + * files (the "Software"), to deal in the Software without
    + * restriction, including without limitation the rights to use,
    + * copy, modify, merge, publish, distribute, sublicense, and/or
    + * sell copies of the Software, and to permit persons to whom the
    + * Software is furnished to do so, subject to the following
    + * conditions:
    + *
    + * The above copyright notice and this permission notice shall be
    + * included in all copies or substantial portions of the Software.
    + *
    + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
    + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
    + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
    + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
    + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
    + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
    + * OTHER DEALINGS IN THE SOFTWARE.
    + */
    +
    +/* AXP813/818 Integrated Power Management Chip */
    +
    +&axp81x {
    + interrupt-controller;
    + #interrupt-cells = <1>;
    +
    + regulators {
    + /* Default work frequency for buck regulators */
    + x-powers,dcdc-freq = <3000>;
    +
    + reg_dcdc1: dcdc1 {
    + };
    +
    + reg_dcdc2: dcdc2 {
    + };
    +
    + reg_dcdc3: dcdc3 {
    + };
    +
    + reg_dcdc4: dcdc4 {
    + };
    +
    + reg_dcdc5: dcdc5 {
    + };
    +
    + reg_dcdc6: dcdc6 {
    + };
    +
    + reg_dcdc7: dcdc7 {
    + };
    +
    + reg_aldo1: aldo1 {
    + };
    +
    + reg_aldo2: aldo2 {
    + };
    +
    + reg_aldo3: aldo3 {
    + };
    +
    + reg_dldo1: dldo1 {
    + };
    +
    + reg_dldo2: dldo2 {
    + };
    +
    + reg_dldo3: dldo3 {
    + };
    +
    + reg_dldo4: dldo4 {
    + };
    +
    + reg_eldo1: eldo1 {
    + };
    +
    + reg_eldo2: eldo2 {
    + };
    +
    + reg_eldo3: eldo3 {
    + };
    +
    + reg_fldo1: fldo1 {
    + };
    +
    + reg_fldo2: fldo2 {
    + };
    +
    + reg_fldo3: fldo3 {
    + };
    +
    + reg_ldo_io0: ldo-io0 {
    + /* Disable by default to avoid conflicts with GPIO */
    + status = "disabled";
    + };
    +
    + reg_ldo_io1: ldo-io1 {
    + /* Disable by default to avoid conflicts with GPIO */
    + status = "disabled";
    + };
    +
    + reg_rtc_ldo: rtc-ldo {
    + /* RTC_LDO is a fixed, always-on regulator */
    + regulator-always-on;
    + regulator-min-microvolt = <1800000>;
    + regulator-max-microvolt = <1800000>;
    + };
    +
    + reg_sw: sw {
    + };
    +
    + reg_drivevbus: drivevbus {
    + status = "disabled";
    + };
    + };
    +};
    --
    2.14.2
    \
     
     \ /
      Last update: 2017-09-29 05:27    [W:4.322 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site