lkml.org 
[lkml]   [2017]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/5] media: atmel-isc: Enable the clocks during probe
Hi Wenyou,

On Thu, Sep 28, 2017 at 04:18:26PM +0800, Wenyou Yang wrote:
> To meet the relationship, enable the HCLOCK and ispck during the
> device probe, "isc_pck frequency is less than or equal to isc_ispck,
> and isc_ispck is greater than or equal to HCLOCK."
> Meanwhile, call the pm_runtime_enable() in the right place.
>
> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
> ---
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/media/platform/atmel/atmel-isc.c | 31 +++++++++++++++++++++++++------
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
> index 0b15dc1a3a0b..f092c95587c1 100644
> --- a/drivers/media/platform/atmel/atmel-isc.c
> +++ b/drivers/media/platform/atmel/atmel-isc.c
> @@ -1594,6 +1594,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> struct isc_subdev_entity *sd_entity;
> struct video_device *vdev = &isc->video_dev;
> struct vb2_queue *q = &isc->vb2_vidq;
> + struct device *dev = isc->dev;
> int ret;
>
> ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev);
> @@ -1677,6 +1678,10 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
> return ret;
> }
>
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + pm_request_idle(dev);

Remember that the driver's async complete function could never get called.

What would be the reason to move it here?

> +
> return 0;
> }
>
> @@ -1856,25 +1861,37 @@ static int atmel_isc_probe(struct platform_device *pdev)
> return ret;
> }
>
> + ret = clk_prepare_enable(isc->hclock);
> + if (ret) {
> + dev_err(dev, "failed to enable hclock: %d\n", ret);
> + return ret;
> + }
> +
> ret = isc_clk_init(isc);
> if (ret) {
> dev_err(dev, "failed to init isc clock: %d\n", ret);
> - goto clean_isc_clk;
> + goto unprepare_hclk;
> }
>
> isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
>
> + ret = clk_prepare_enable(isc->ispck);
> + if (ret) {
> + dev_err(dev, "failed to enable ispck: %d\n", ret);
> + goto unprepare_hclk;
> + }
> +
> /* ispck should be greater or equal to hclock */
> ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
> if (ret) {
> dev_err(dev, "failed to set ispck rate: %d\n", ret);
> - goto clean_isc_clk;
> + goto unprepare_clk;
> }
>
> ret = v4l2_device_register(dev, &isc->v4l2_dev);
> if (ret) {
> dev_err(dev, "unable to register v4l2 device.\n");
> - goto clean_isc_clk;
> + goto unprepare_clk;
> }
>
> ret = isc_parse_dt(dev, isc);
> @@ -1907,8 +1924,6 @@ static int atmel_isc_probe(struct platform_device *pdev)
> break;
> }
>
> - pm_runtime_enable(dev);
> -
> return 0;
>
> cleanup_subdev:
> @@ -1917,7 +1932,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
> unregister_v4l2_device:
> v4l2_device_unregister(&isc->v4l2_dev);
>
> -clean_isc_clk:
> +unprepare_clk:
> + clk_disable_unprepare(isc->ispck);
> +unprepare_hclk:
> + clk_disable_unprepare(isc->hclock);

I think you're missing clk_disable_unprepare() in the driver's remove
callback.

> +
> isc_clk_cleanup(isc);
>
> return ret;

--
Regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi

\
 
 \ /
  Last update: 2017-09-28 23:26    [W:0.054 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site