lkml.org 
[lkml]   [2017]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] Revert "net: dsa: bcm_sf2: Defer port enabling to calling port_enable"
Date
This reverts commit e85ec74ace29 ("net: dsa: bcm_sf2: Defer port
enabling to calling port_enable") because this now makes an unbind
followed by a bind to fail connecting to the ingrated PHY.

What this patch missed is that we need the PHY to be enabled with
bcm_sf2_gphy_enable_set() before probing it on the MDIO bus. This is
correctly done in the ops->setup() function, but by the time
ops->port_enable() runs, this is too late. Upon unbind we would power
down the PHY, and so when we would bind again, the PHY would be left
powered off.

Fixes: e85ec74ace29 ("net: dsa: bcm_sf2: Defer port enabling to calling port_enable")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 898d5642b516..7aecc98d0a18 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -754,11 +754,14 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
unsigned int port;

- /* Disable unused ports and configure IMP port */
+ /* Enable all valid ports and disable those unused */
for (port = 0; port < priv->hw_params.num_ports; port++) {
- if (dsa_is_cpu_port(ds, port))
+ /* IMP port receives special treatment */
+ if ((1 << port) & ds->enabled_port_mask)
+ bcm_sf2_port_setup(ds, port, NULL);
+ else if (dsa_is_cpu_port(ds, port))
bcm_sf2_imp_setup(ds, port);
- else if (!((1 << port) & ds->enabled_port_mask))
+ else
bcm_sf2_port_disable(ds, port, NULL);
}

--
2.9.3
\
 
 \ /
  Last update: 2017-09-28 20:19    [W:0.028 / U:9.996 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site