lkml.org 
[lkml]   [2017]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY
From
Date


On 09/27/2017 12:34 AM, Corentin Labbe wrote:
> This patch add documentation about the MDIO switch used on sun8i-h3-emac
> for integrated PHY.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> ---
> .../devicetree/bindings/net/dwmac-sun8i.txt | 138 +++++++++++++++++++--
> 1 file changed, 126 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> index 725f3b187886..e2ef4683df08 100644
> --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> @@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
> Please see stmmac.txt for the other unchanged properties.
>
> Required properties:
> -- compatible: should be one of the following string:
> +- compatible: must be one of the following string:
> "allwinner,sun8i-a83t-emac"
> "allwinner,sun8i-h3-emac"
> "allwinner,sun8i-v3s-emac"
> "allwinner,sun50i-a64-emac"
> - reg: address and length of the register for the device.
> - interrupts: interrupt for the device
> -- interrupt-names: should be "macirq"
> +- interrupt-names: must be "macirq"
> - clocks: A phandle to the reference clock for this device
> -- clock-names: should be "stmmaceth"
> +- clock-names: must be "stmmaceth"
> - resets: A phandle to the reset control for this device
> -- reset-names: should be "stmmaceth"
> +- reset-names: must be "stmmaceth"
> - phy-mode: See ethernet.txt
> - phy-handle: See ethernet.txt
> - #address-cells: shall be 1
> @@ -39,23 +39,38 @@ Optional properties for the following compatibles:
> - allwinner,leds-active-low: EPHY LEDs are active low
>
> Required child node of emac:
> -- mdio bus node: should be named mdio
> +- mdio bus node: with compatible "snps,dwmac-mdio"
>
> Required properties of the mdio node:
> - #address-cells: shall be 1
> - #size-cells: shall be 0
>
> -The device node referenced by "phy" or "phy-handle" should be a child node
> +The device node referenced by "phy" or "phy-handle" must be a child node
> of the mdio node. See phy.txt for the generic PHY bindings.
>
> -Required properties of the phy node with the following compatibles:
> +The following compatibles require that the mdio node have a mdio-mux child
> +node called "mdio-mux":
> + - "allwinner,sun8i-h3-emac"
> + - "allwinner,sun8i-v3s-emac":
> +Required properties for the mdio-mux node:
> + - compatible = "mdio-mux"
> + - one child mdio for the integrated mdio
> + - one child mdio for the external mdio if present (V3s have none)
> +Required properties for the mdio-mux children node:
> + - reg: 1 for internal MDIO bus, 2 for external MDIO bus
> +
> +The following compatibles require a PHY node representing the integrated
> +PHY, under the integrated MDIO bus node if an mdio-mux node is used:
> - "allwinner,sun8i-h3-emac",
> - "allwinner,sun8i-v3s-emac":
> +
> +Required properties of the integrated phy node:
> - clocks: a phandle to the reference clock for the EPHY
> - resets: a phandle to the reset control for the EPHY
> +- phy-is-integrated
> +- Must be a child of the integrated mdio
>
> -Example:
> -
> +Example with integrated PHY:
> emac: ethernet@1c0b000 {
> compatible = "allwinner,sun8i-h3-emac";
> syscon = <&syscon>;
> @@ -72,13 +87,112 @@ emac: ethernet@1c0b000 {
> phy-handle = <&int_mii_phy>;
> phy-mode = "mii";
> allwinner,leds-active-low;
> +
> + mdio0: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> +
> + mdio-mux {
> + compatible = "mdio-mux";
> + #address-cells = <1>;
> + #size-cells = <0>;

Sorry for chiming in so late, but why don't we have the mdio-mux be the
root node here in the mdio bus hierarchy? I understand that with this
binding proposed here, we need to have patch 11 included (which btw,
should come before any DTS change), but this does not seem to accurately
model the HW.

The mux itself is not a child node of the MDIO bus controller, it does
not really belong in that address space although it does mangle the MDIO
bus controller address space between the two ends of the mux.

If this has been debated before, apologies for missing that part of the
discussion.

> +
> + int_mdio: mdio@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + int_mii_phy: ethernet-phy@1 {
> + reg = <1>;
> + clocks = <&ccu CLK_BUS_EPHY>;
> + resets = <&ccu RST_BUS_EPHY>;
> + phy-is-integrated;
> + };
> + };
> + ext_mdio: mdio@2 {
> + reg = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> +};
> +
> +Example with external PHY:
> +emac: ethernet@1c0b000 {
> + compatible = "allwinner,sun8i-h3-emac";
> + syscon = <&syscon>;
> + reg = <0x01c0b000 0x104>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + resets = <&ccu RST_BUS_EMAC>;
> + reset-names = "stmmaceth";
> + clocks = <&ccu CLK_BUS_EMAC>;
> + clock-names = "stmmaceth";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy-handle = <&ext_rgmii_phy>;
> + phy-mode = "rgmii";
> + allwinner,leds-active-low;
> +
> + mdio0: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> +
> + mdio-mux {
> + compatible = "mdio-mux";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + int_mdio: mdio@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + int_mii_phy: ethernet-phy@1 {
> + reg = <1>;
> + clocks = <&ccu CLK_BUS_EPHY>;
> + resets = <&ccu RST_BUS_EPHY>;
> + phy-is-integrated;
> + };
> + };
> + ext_mdio: mdio@2 {
> + reg = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + ext_rgmii_phy: ethernet-phy@1 {
> + reg = <1>;
> + };
> + }:
> + };
> + };
> +};
> +
> +Example with SoC without integrated PHY
> +
> +emac: ethernet@1c0b000 {
> + compatible = "allwinner,sun8i-a83t-emac";
> + syscon = <&syscon>;
> + reg = <0x01c0b000 0x104>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + resets = <&ccu RST_BUS_EMAC>;
> + reset-names = "stmmaceth";
> + clocks = <&ccu CLK_BUS_EMAC>;
> + clock-names = "stmmaceth";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy-handle = <&ext_rgmii_phy>;
> + phy-mode = "rgmii";
> +
> mdio: mdio {
> + compatible = "snps,dwmac-mdio";
> #address-cells = <1>;
> #size-cells = <0>;
> - int_mii_phy: ethernet-phy@1 {
> + ext_rgmii_phy: ethernet-phy@1 {
> reg = <1>;
> - clocks = <&ccu CLK_BUS_EPHY>;
> - resets = <&ccu RST_BUS_EPHY>;
> };
> };
> };
>

--
Florian

\
 
 \ /
  Last update: 2017-09-28 06:54    [W:0.140 / U:2.096 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site