lkml.org 
[lkml]   [2017]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectProblems with a usb sound card
Date
Hi!,

In my dmesg, I get:

[ 3.078688] usb 1-1.2.6: new full-speed USB device number 9 using ehci-pci
[ 3.185101] usb 1-1.2.6: config 1 has an invalid interface number: 6 but
max is 5
[ 3.185135] usb 1-1.2.6: config 1 has an invalid interface number: 7 but
max is 5
[ 3.185143] usb 1-1.2.6: config 1 has no interface number 3
[ 3.185149] usb 1-1.2.6: config 1 has no interface number 5
[ 3.188716] usb 1-1.2.6: New USB device found, idVendor=1210,
idProduct=0009
[ 3.188732] usb 1-1.2.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.188740] usb 1-1.2.6: Product: Lexicon Lambda
[ 3.188744] usb 1-1.2.6: Manufacturer: Lexicon

And then later:

[ 7.132474] usb 1-1.2.6: 1:1: cannot get freq at ep 0x1
[ 7.140529] usb 1-1.2.6: 1:2: cannot get freq at ep 0x1
[ 7.149596] usb 1-1.2.6: 2:1: cannot get freq at ep 0x82

The device in question from lsusb:

Bus 001 Device 009: ID 1210:0009 DigiTech

The card lights up on boot, but then turns off again before the boot is
complete. To get sound working, I have to unplug it and re-plug it. That's
doable, but annoying. Above is sparse information, please ask for more.

Thanks,
Niels

\
 
 \ /
  Last update: 2017-09-28 12:58    [W:0.158 / U:1.800 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site