lkml.org 
[lkml]   [2017]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: alpha runtime warnings due to commit 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host ...")
On Wed, Sep 27, 2017 at 02:55:02PM -0500, Bjorn Helgaas wrote:
> [+cc linux-pci, linux-ide, DaveM]
>
> On Wed, Sep 27, 2017 at 11:30:34AM +0100, Lorenzo Pieralisi wrote:
> > Bjorn, Guenter,
> >
> > On Wed, Sep 20, 2017 at 12:31:04PM +0100, Lorenzo Pieralisi wrote:
> > > On Tue, Sep 19, 2017 at 11:02:33AM -0700, Guenter Roeck wrote:
> > > > On Tue, Sep 19, 2017 at 10:12:32AM +0100, Lorenzo Pieralisi wrote:
> > > > > On Mon, Sep 18, 2017 at 07:00:55PM -0700, Guenter Roeck wrote:
> > > > > > Hi,
> > > > > >
> > > > > > I see the following runtime warnings in mainline when running alpha images in qemu.
> > > > > >
> > > > > >
> > > > > > Floppy drive(s): fd0 is 2.88M
> > > > > > ide0: disabled, no IRQ
> > > > > > ide0: failed to initialize IDE interface
> > > > > > ide0: disabling port
> > > > > > cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> > > > > > CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
> > > > > > cmd64x 0000:00:02.0: can't reserve resources
> > > > > > CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
> > > > > > ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> > > > > > ------------[ cut here ]------------
> > > > > > WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
> > > > > > sysfs: cannot create duplicate filename '/class/ide_port/ide0'
> > > > > > ...
> > > > > >
> > > > > > Trace:
> > > > > > [<fffffc00003308a0>] __warn+0x160/0x190
> > > > > > [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> > > > > > [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
> > > > > > [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> > > > > > [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
> > > > > > [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> > > > > > [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> > > > > > [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
> > > > > > [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
> > > > > > [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
> > > > > > [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
> > > > > > [<fffffc00005ba690>] device_create+0x50/0x70
> > > > > > [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
> > > > > > [<fffffc00005df330>] ide_host_register+0x450/0xa00
> > > > > > [<fffffc00005ba2a0>] device_register+0x20/0x50
> > > > > > [<fffffc00005df330>] ide_host_register+0x450/0xa00
> > > > > > [<fffffc00005df944>] ide_host_add+0x64/0xe0
> > > > > > [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
> > > > > > [<fffffc0000310288>] do_one_initcall+0x68/0x260
> > > > > > [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
> > > > > > [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> > > > > > [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
> > > > > > [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> > > > > >
> > > > > > ---[ end trace 24a70433c3e4d374 ]---
> > > > > > ide0: disabling port
> > > > > >
> > > > > > [ multiple times ]
> > > > > >
> > > > > > A complete log is available at http://kerneltests.org/builders/qemu-alpha-master.
> > > > > >
> > > > > > Prior to the offending commit, the kernel log looks as follows.
> > > > > >
> > > > > > ...
> > > > > > Uniform Multi-Platform E-IDE driver
> > > > > > cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> > > > > > cmd64x 0000:00:02.0: IDE port disabled
> > > > > > cmd64x 0000:00:02.0: 100% native mode on irq 28
> > > > > > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > > > > > ide0: BM-DMA at 0x8040-0x8047
> > > > > > Floppy drive(s): fd0 is 2.88M
> > > > > > ide0 at 0x8050-0x8057,0x8062 on irq 28 (serialized)
> > > > > > ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
> > > > > > ide1 at 0x1f0-0x1f7,0x3f6 on irq 14
> > > > > > ide2 at 0x170-0x177,0x376 on irq 15
> > > > > > ide-gd driver 1.18
> > > > > > ide-cd driver 5.00
> > > > > > ...
> > > > > >
> > > > > > Reverting the commit is not possible due to context changes.
> > > > > >
> > > > > > Bisect log is attached.
> > > > >
> > > > > Ok thanks. Can you please check if the diff below fixes the issue ?
> > > > >
> > > > It does. Feel free to add
> > > >
> > > > Tested-by: Guenter Roeck <linux@roeck-us.net>
> > > >
> > > > to the actual patch.
> > > >
> > > > > I think the problem is that now we allocate the IRQ at device_probe
> > > > > instead of device_add time, if the patch below fixes the issue the
> > > > > question is whether we want to move pci_assign_irq() to pci_device_add()
> > > > > for ALL PCI devices or just fix this for IDE subsytem.
> > > > >
> > > >
> > > > That I can not answer ...
> > >
> > > It is not a clean-cut answer. Moving pci_assign_irq() from
> > >
> > > pci_device_probe()
> > >
> > > to
> > >
> > > pci_device_add()
> > >
> > > would fix this issue too and just map/swizzle() irqs for ALL PCI devices
> > > earlier (even ones that are not even probed); it should have no side
> > > effects (famous last words) and would be a cleaner fix.
>
> Hmmm, this is ugly. I *think* this is related to ide_pci_init_two().
> We already call pci_assign_irq() from pci_device_probe(), where we try
> to bind one device to a driver. But ide_pci_init_two() deals with
> *two* devices: the one pci_device_probe() is trying to bind, and
> another random one found via pci_get_slot(). We have not called
> pci_assign_irq() for this second device.
>
> That breaks the model the PCI core expects, where we call the driver
> probe method for device X, and that method deals only with device X.
>
> We can fix this by doing the pci_assign_irq() either in the PCI core's
> device add path or in the driver's probe path (ide_pci_init_two(), as
> in the patch below). Doing it in the PCI core is sort of ugly because
> there's no obvious reason why we should map/swizzle the IRQ if there's
> no driver.
>
> Doing it in the driver is also sort of ugly because this is something
> that should be confined to the core (pci_assign_irq() probably should
> be declared in drivers/pci/pci.h so it's not available outside the
> core).
>
> I think the patch below means we call pci_assign_irq() *twice* on the
> device we're binding: once from pci_device_probe() and again from
> do_ide_setup_pci_device(). And I guess we might call it twice for the
> second device, too: once from do_ide_setup_pci_device() and again if
> pci_device_probe() tries to bind it. It's probably idempotent, but it
> does seem a little ugly.
>
> I guess I agree that calling pci_assign_irq() from pci_device_add() is
> the lesser evil. That will do it unnecessarily in cases where a
> device doesn't have a driver, but it should be safe. It sets
> pdev->irq but probably doesn't touch the device itself.

I will do that, actually this would reinstate the exact boot stage at
which pci_fixup_irqs() was called (except that pci_assign_irq() does
that on a per host-bridge basis and in core code) because
pci_fixup_irqs() was called after enumeration before PCI devices were
added (ie before calling pci_bus_add_devices()), it *should* be safe.

> We do more IRQ setup at pci_enable_device()-time (or probe-time for
> arm64) via acpi_pci_irq_enable(). This also updates pdev->irq. I'd
> rather not do that part at device add-time, because it does things
> like allocate and enable interrupt links, and we shouldn't do that
> until we know we have a driver for the device.
>
> But this is potentially another problem for this "second-device" thing
> IDE does. We've called pci_assign_irq() but not acpi_pci_irq_enable()
> for the second device, so we may still get the wrong IRQ for it.

I have not touched the ACPI irq assignment path with my patches on
purpose. Put it differently, PNP0A03 host bridges do not have any
{map/swizzle}_irq() hook (yet) so pci_assign_irq() does nothing on
them. ACPI based platforms never used pci_fixup_irqs() so I changed
nothing on them (and I doubt I can given how complicated x86 legacy
IRQ assignment code is in arch code).

I will send the fix shortly - even though I am not sure I can add
a sensible Fixes: tag to it, I think:

Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()")

is what makes most sense.

Thanks,
Lorenzo

> > > Fix below is fine but I am not a big fan of it, I would like to
> > > get Bjorn's opinion before I send a fix out.
> >
> > I think that for now the fix below should be ok, I would like to
> > send it out before -rc3, the only question is related to the
> > "Fixes:" tag, I am reluctant to add:
> >
> > Fixes: 0e4c2eeb758 ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge mapping hooks")
> >
> > since this is not necessarily just an alpha/PCI bug (ie it is related to
> > IDE legacy IRQ routing - which Guenter hit on Alpha), the tag can be
> > misleading in that sense.
> >
> > Please let me know what you think, I will send out the patch then.
> >
> > Thanks,
> > Lorenzo
> >
> > > Thanks,
> > > Lorenzo
> > >
> > > > Guenter
> > > >
> > > > > Lorenzo
> > > > >
> > > > > -- >8 --
> > > > > diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
> > > > > index 112d2fe..94ca9cc 100644
> > > > > --- a/drivers/ide/setup-pci.c
> > > > > +++ b/drivers/ide/setup-pci.c
> > > > > @@ -502,6 +502,8 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
> > > > > {
> > > > > int pciirq, ret;
> > > > >
> > > > > + pci_assign_irq(dev);
> > > > > +
> > > > > /*
> > > > > * Can we trust the reported IRQ?
> > > > > */

\
 
 \ /
  Last update: 2017-09-28 11:23    [W:0.085 / U:0.236 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site