Messages in this thread | | | Subject | Re: [PATCH v2] mmc: core: add driver strength selection when selecting hs400es | From | Shawn Lin <> | Date | Wed, 27 Sep 2017 09:28:22 +0800 |
| |
On 2017/9/26 8:03, Chanho Min wrote: > The driver strength selection is missed and required when selecting > hs400es. So, It is added here. > > v2: add stable tag. > > Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") > Cc: stable@vger.kernel.org > Signed-off-by: Hankyung Yu <hankyung.yu@lge.com> > Signed-off-by: Chanho Min <chanho.min@lge.com> > Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> > ---
Should move changelog out of commit msg and use 12bit SHA-1 ID.
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
> drivers/mmc/core/mmc.c | 36 +++++++++++++++++++----------------- > 1 file changed, 19 insertions(+), 17 deletions(-) > > diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c > index a7eb623..36217ad 100644 > --- a/drivers/mmc/core/mmc.c > +++ b/drivers/mmc/core/mmc.c > @@ -1286,6 +1286,23 @@ int mmc_hs400_to_hs200(struct mmc_card *card) > return err; > } > > +static void mmc_select_driver_type(struct mmc_card *card) > +{ > + int card_drv_type, drive_strength, drv_type; > + > + card_drv_type = card->ext_csd.raw_driver_strength | > + mmc_driver_type_mask(0); > + > + drive_strength = mmc_select_drive_strength(card, > + card->ext_csd.hs200_max_dtr, > + card_drv_type, &drv_type); > + > + card->drive_strength = drive_strength; > + > + if (drv_type) > + mmc_set_driver_type(card->host, drv_type); > +} > + > static int mmc_select_hs400es(struct mmc_card *card) > { > struct mmc_host *host = card->host; > @@ -1341,6 +1358,8 @@ static int mmc_select_hs400es(struct mmc_card *card) > goto out_err; > } > > + mmc_select_driver_type(card); > + > /* Switch card to HS400 */ > val = EXT_CSD_TIMING_HS400 | > card->drive_strength << EXT_CSD_DRV_STR_SHIFT; > @@ -1374,23 +1393,6 @@ static int mmc_select_hs400es(struct mmc_card *card) > return err; > } > > -static void mmc_select_driver_type(struct mmc_card *card) > -{ > - int card_drv_type, drive_strength, drv_type; > - > - card_drv_type = card->ext_csd.raw_driver_strength | > - mmc_driver_type_mask(0); > - > - drive_strength = mmc_select_drive_strength(card, > - card->ext_csd.hs200_max_dtr, > - card_drv_type, &drv_type); > - > - card->drive_strength = drive_strength; > - > - if (drv_type) > - mmc_set_driver_type(card->host, drv_type); > -} > - > /* > * For device supporting HS200 mode, the following sequence > * should be done before executing the tuning process. >
| |