lkml.org 
[lkml]   [2017]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/8] extcon: gpio: Get debounce setting from device property
Hi Linus,

On 2017년 09월 24일 23:56, Linus Walleij wrote:
> Look up the debouncing value using the device property that will
> pick it from device tree or ACPI DSDT or whatever is available.
>
> Reintroduce the debounce handling previously deleted in the
> series, setting the delayed worker to delay 0 ms if the GPIO
> driver supports debouncing for us, else just delay the reading
> of the value delayed by jiffies.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/extcon/extcon-gpio.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)

I checked the pinctrl-bindings.txt[1] in order to check
the property name of 'input-debounce'. It looks good to me.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

>
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index 6d9cb4ed11c2..8fc52631c8a2 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -24,6 +24,7 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/slab.h>
> #include <linux/workqueue.h>
>
> @@ -35,7 +36,6 @@
> * value.
> * @gpiod: GPIO descriptor for this external connector.
> * @extcon_id: The unique id of specific external connector.
> - * @debounce: Debounce time for GPIO IRQ in ms.
> * @check_on_resume: Boolean describing whether to check the state of gpio
> * while resuming from sleep.
> */
> @@ -45,7 +45,6 @@ struct gpio_extcon_data {
> unsigned long debounce_jiffies;
> struct gpio_desc *gpiod;
> unsigned int extcon_id;
> - unsigned long debounce;
> bool check_on_resume;
> };
>
> @@ -74,6 +73,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> struct gpio_extcon_data *data;
> struct device *dev = &pdev->dev;
> unsigned long irq_flags;
> + u32 debounce_usecs;
> int irq;
> int ret;
>
> @@ -109,6 +109,15 @@ static int gpio_extcon_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
>
> + ret = device_property_read_u32(dev, "input-debounce", &debounce_usecs);
> + if (ret || !debounce_usecs) {
> + dev_err(dev, "illegal debounce value, set to 20 ms\n");
> + debounce_usecs = 20000;
> + }
> + ret = gpiod_set_debounce(data->gpiod, debounce_usecs);
> + if (ret)
> + data->debounce_jiffies = msecs_to_jiffies(debounce_usecs * 1000);
> +
> ret = devm_extcon_dev_register(dev, data->edev);
> if (ret < 0)
> return ret;
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2017-09-26 04:24    [W:0.917 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site