lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/12] ARM: dts: sunxi: h3/h5: Fix simple-bus unit address format error
Date
This patch remove leading 0 of unit address and so remove
lots of warning when building DT with W=1.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 72 +++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index a8e9b8f378ba..59ddac9f65a7 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -91,7 +91,7 @@
reg = <0x01c00000 0x1000>;
};

- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-h3-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
@@ -100,7 +100,7 @@
#dma-cells = <1>;
};

- mmc0: mmc@01c0f000 {
+ mmc0: mmc@1c0f000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c0f000 0x1000>;
resets = <&ccu RST_BUS_MMC0>;
@@ -111,7 +111,7 @@
#size-cells = <0>;
};

- mmc1: mmc@01c10000 {
+ mmc1: mmc@1c10000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c10000 0x1000>;
resets = <&ccu RST_BUS_MMC1>;
@@ -122,7 +122,7 @@
#size-cells = <0>;
};

- mmc2: mmc@01c11000 {
+ mmc2: mmc@1c11000 {
/* compatible and clocks are in per SoC .dtsi file */
reg = <0x01c11000 0x1000>;
resets = <&ccu RST_BUS_MMC2>;
@@ -133,7 +133,7 @@
#size-cells = <0>;
};

- usb_otg: usb@01c19000 {
+ usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-h3-musb";
reg = <0x01c19000 0x400>;
clocks = <&ccu CLK_BUS_OTG>;
@@ -158,7 +158,7 @@
status = "disabled";
};

- usbphy: phy@01c19400 {
+ usbphy: phy@1c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
<0x01c1a800 0x4>,
@@ -190,7 +190,7 @@
#phy-cells = <1>;
};

- ehci0: usb@01c1a000 {
+ ehci0: usb@1c1a000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
status = "disabled";
};

- ohci0: usb@01c1a400 {
+ ohci0: usb@1c1a400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -209,7 +209,7 @@
status = "disabled";
};

- ehci1: usb@01c1b000 {
+ ehci1: usb@1c1b000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -220,7 +220,7 @@
status = "disabled";
};

- ohci1: usb@01c1b400 {
+ ohci1: usb@1c1b400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -232,7 +232,7 @@
status = "disabled";
};

- ehci2: usb@01c1c000 {
+ ehci2: usb@1c1c000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -243,7 +243,7 @@
status = "disabled";
};

- ohci2: usb@01c1c400 {
+ ohci2: usb@1c1c400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -255,7 +255,7 @@
status = "disabled";
};

- ehci3: usb@01c1d000 {
+ ehci3: usb@1c1d000 {
compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
reg = <0x01c1d000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
@@ -266,7 +266,7 @@
status = "disabled";
};

- ohci3: usb@01c1d400 {
+ ohci3: usb@1c1d400 {
compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
reg = <0x01c1d400 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -278,7 +278,7 @@
status = "disabled";
};

- ccu: clock@01c20000 {
+ ccu: clock@1c20000 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
@@ -287,7 +287,7 @@
#reset-cells = <1>;
};

- pio: pinctrl@01c20800 {
+ pio: pinctrl@1c20800 {
/* compatible is in per SoC .dtsi file */
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -400,7 +400,7 @@
};
};

- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -453,7 +453,7 @@
};
};

- spi0: spi@01c68000 {
+ spi0: spi@1c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -469,7 +469,7 @@
#size-cells = <0>;
};

- spi1: spi@01c69000 {
+ spi1: spi@1c69000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
@@ -485,13 +485,13 @@
#size-cells = <0>;
};

- wdt0: watchdog@01c20ca0 {
+ wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};

- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-spdif";
reg = <0x01c21000 0x400>;
@@ -504,7 +504,7 @@
status = "disabled";
};

- pwm: pwm@01c21400 {
+ pwm: pwm@1c21400 {
compatible = "allwinner,sun8i-h3-pwm";
reg = <0x01c21400 0x8>;
clocks = <&osc24M>;
@@ -512,7 +512,7 @@
status = "disabled";
};

- i2s0: i2s@01c22000 {
+ i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-i2s";
reg = <0x01c22000 0x400>;
@@ -525,7 +525,7 @@
status = "disabled";
};

- i2s1: i2s@01c22400 {
+ i2s1: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-i2s";
reg = <0x01c22400 0x400>;
@@ -538,7 +538,7 @@
status = "disabled";
};

- codec: codec@01c22c00 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun8i-h3-codec";
reg = <0x01c22c00 0x400>;
@@ -552,7 +552,7 @@
status = "disabled";
};

- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
@@ -565,7 +565,7 @@
status = "disabled";
};

- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
@@ -578,7 +578,7 @@
status = "disabled";
};

- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -591,7 +591,7 @@
status = "disabled";
};

- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
@@ -604,7 +604,7 @@
status = "disabled";
};

- i2c0: i2c@01c2ac00 {
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -617,7 +617,7 @@
#size-cells = <0>;
};

- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
@@ -643,7 +643,7 @@
#size-cells = <0>;
};

- gic: interrupt-controller@01c81000 {
+ gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
@@ -654,7 +654,7 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};

- rtc: rtc@01f00000 {
+ rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
@@ -671,12 +671,12 @@
#reset-cells = <1>;
};

- codec_analog: codec-analog@01f015c0 {
+ codec_analog: codec-analog@1f015c0 {
compatible = "allwinner,sun8i-h3-codec-analog";
reg = <0x01f015c0 0x4>;
};

- ir: ir@01f02000 {
+ ir: ir@1f02000 {
compatible = "allwinner,sun5i-a13-ir";
clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
clock-names = "apb", "ir";
@@ -686,7 +686,7 @@
status = "disabled";
};

- r_pio: pinctrl@01f02c00 {
+ r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
--
2.13.5
\
 
 \ /
  Last update: 2017-09-21 19:39    [W:0.111 / U:2.660 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site