lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 0/7] AXP803 AC/Battery support
On Wed, 20 Sep 2017 23:18:07 +0800
Icenowy Zheng <icenowy@aosc.io> wrote:

> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power inputs:
> AC, USB and Battery.
>
> This patchset adds support for the AC and Battery supplies, which is useful
> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, Pinebook).
>
> The USB supply is not yet supported in this patchset because it's not
> present on Pine series boards.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXs.
>
> In order to enable battery monitoring the ADC for battery is also enabled
> for AXP803.

I'll go with the obvious question...

Why an RFC rather than a standard patch submission? I'm not immediately
seeing what is controversial!

Jonathan

>
> Icenowy Zheng (7):
> dt-bindings: add compatibles for AXP803 Battery/USB power supplies
> iio: adc: axp20x-adc: allow to skip ADC rate setup now
> iio: adc: axp20x-adc: add support for AXP803
> power: supply: axp20x-battery: support AXP803
> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery
> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI
> arm64: allwinner: a64: enable AC and Battery for Pine64
>
> .../bindings/power/supply/axp20x_battery.txt | 1 +
> .../bindings/power/supply/axp20x_usb_power.txt | 1 +
> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++
> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++
> drivers/iio/adc/axp20x_adc.c | 114 ++++++++++++++++++++-
> drivers/mfd/axp20x.c | 11 ++
> drivers/power/supply/axp20x_battery.c | 88 ++++++++++++++--
> 7 files changed, 226 insertions(+), 12 deletions(-)
>

\
 
 \ /
  Last update: 2017-09-21 19:34    [W:0.149 / U:3.868 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site