lkml.org 
[lkml]   [2017]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 2/2] net: dsa: lan9303: Add basic offloading of unicast traffic
Hi Egil

> +static void lan9303_bridge_ports(struct lan9303 *chip)
> +{
> + /* ports bridged: remove mirroring */
> + lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR, 0);
> +}

Could you replace the 0 with something symbolic which makes this
easier to understand.

#define LAN9303_SWE_PORT_MIRROR_DISABLED 0

> +
> static int lan9303_handle_reset(struct lan9303 *chip)
> {
> if (!chip->reset_gpio)
> @@ -844,6 +866,69 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port,
> }
> }
>
> +static int lan9303_port_bridge_join(struct dsa_switch *ds, int port,
> + struct net_device *br)
> +{
> + struct lan9303 *chip = ds->priv;
> +
> + dev_dbg(chip->dev, "%s(port %d)\n", __func__, port);
> + if (ds->ports[1].bridge_dev == ds->ports[2].bridge_dev) {
> + lan9303_bridge_ports(chip);
> + chip->is_bridged = true; /* unleash stp_state_set() */
> + }
> +
> + return 0;
> +}
> +
> +static void lan9303_port_bridge_leave(struct dsa_switch *ds, int port,
> + struct net_device *br)
> +{
> + struct lan9303 *chip = ds->priv;
> +
> + dev_dbg(chip->dev, "%s(port %d)\n", __func__, port);
> + if (chip->is_bridged) {
> + lan9303_separate_ports(chip);
> + chip->is_bridged = false;
> + }
> +}
> +
> +static void lan9303_port_stp_state_set(struct dsa_switch *ds, int port,
> + u8 state)
> +{
> + int portmask, portstate;
> + struct lan9303 *chip = ds->priv;
> +
> + dev_dbg(chip->dev, "%s(port %d, state %d)\n",
> + __func__, port, state);
> + if (!chip->is_bridged)
> + return; /* touching SWE_PORT_STATE will break port separation */

I'm wondering how this is supposed to work. Please add a good comment
here, since the hardware is forcing you to do something odd.

Maybe it would be a good idea to save the STP state in chip. And then
when chip->is_bridged is set true, change the state in the hardware to
the saved value?

What happens when port 0 is added to the bridge, there is then a
minute pause and then port 1 is added? I would expect that as soon as
port 0 is added, the STP state machine for port 0 will start and move
into listening and then forwarding. Due to hardware limitations it
looks like you cannot do this. So what state is the hardware
effectively in? Blocking? Forwarding?

Then port 1 is added. You can then can respect the states. port 1 will
do blocking->listening->forwarding, but what about port 0? The calls
won't get repeated? How does it transition to forwarding?

Andrew

> +
> + switch (state) {
> + case BR_STATE_DISABLED:
> + portstate = LAN9303_SWE_PORT_STATE_DISABLED_PORT0;
> + break;
> + case BR_STATE_BLOCKING:
> + case BR_STATE_LISTENING:
> + portstate = LAN9303_SWE_PORT_STATE_BLOCKING_PORT0;
> + break;
> + case BR_STATE_LEARNING:
> + portstate = LAN9303_SWE_PORT_STATE_LEARNING_PORT0;
> + break;
> + case BR_STATE_FORWARDING:
> + portstate = LAN9303_SWE_PORT_STATE_FORWARDING_PORT0;
> + break;
> + default:
> + portstate = LAN9303_SWE_PORT_STATE_DISABLED_PORT0;
> + dev_err(chip->dev, "unknown stp state: port %d, state %d\n",
> + port, state);
> + }
> +
> + portmask = 0x3 << (port * 2);
> + portstate <<= (port * 2);
> + lan9303_write_switch_reg_mask(chip, LAN9303_SWE_PORT_STATE,
> + portstate, portmask);
> +}

\
 
 \ /
  Last update: 2017-09-21 19:34    [W:0.059 / U:0.400 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site