lkml.org 
[lkml]   [2017]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PM: Document rules on using pm_runtime_resume() in system suspend callbacks
On Wed, Sep 20, 2017 at 6:27 PM, Johannes Stezenbach <js@sig21.net> wrote:
> On Wed, Sep 20, 2017 at 04:01:32PM +0200, Rafael J. Wysocki wrote:
>> On Wed, Sep 20, 2017 at 2:28 PM, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>> > On 20 September 2017 at 02:26, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>> >>
>> >> Second, leaving devices in runtime suspend in the "suspend" phase of system
>> >> suspend is fishy even when their runtime PM is disabled, because that doesn't
>> >> guarantee anything regarding their children or possible consumers. Runtime
>> >> PM may still be enabled for those devices at that time and runtime resume may
>> >> be triggered for them later, in which case it all quickly falls apart.
>> >
>> > This is true, although to me this is a about a different problem and
>> > has very little to do with pm_runtime_force_suspend().
>> >
>> > More precisely, whether runtime PM becomes disabled in the suspend
>> > phase or suspend_late phase, really doesn't matter. Because in the end
>> > this is about suspending/resuming devices in the correct order.
>>
>> Yes, it is, but this is not my point (I didn't make it clear enough I guess).
>>
>> At the time you make the decision to disable runtime PM for a parent
>> (say) and leave it in runtime suspend, all of its children are
>> suspended just fine (otherwise the parent wouldn't have been suspended
>> too). However, you *also* need to make sure that there will be no
>> attempts to resume any of them *after* that point, which practically
>> means that either runtime PM has to have been disabled already for all
>> of them at the time it is disabled for the parent, or there has to be
>> another guarantee in place.
>>
>> That's why the core tries to enforce the "runtime PM disabled for the
>> entire hierarchy below" guarantee for the devices with direct_complete
>> set, but that may just be overkill in many cases. I guess it may be
>> better to use WARN_ON() to catch the cases in which things may really
>> go wrong.
>
> I read this half a dozen times and I'm still confused.
> Moreover, Documentation/driver-api/pm/devices.rst says:
>
> Runtime Power Management model:
>
> Devices may also be put into low-power states while the system is
> running, independently of other power management activity in principle.
> However, devices are not generally independent of each other (for
> example, a parent device cannot be suspended unless all of its child
> devices have been suspended). ...
>
> However, isn't this a fundamental difference of runtime suspend
> vs. system suspend that parent devices *can* be runtime suspended
> before their children?

No, it isn't.

> E.g. an audio codec could keep running
> while the i2c bus used to program its registers can be runtime suspended.
> If this is correct I think it would be useful to spell it out explicitly
> in the documentation.

That's because the i2c bus uses the ignore_children flag that allows
it to override the general rules. :-)

> During system suspend, pm core will suspend children first,
> and if the child's ->suspend hook uses the i2c bus to access registers,
> it will implicitly runtime resume the i2c bus (e.g. due to pm_runtime_get_sync()
> in i2c_dw_xfer()). Later pm core will ->suspend the i2c bus.

Yup.

> I have a hunch the root of the problem is that ->prepare walks the tree
> in top-down order, and its return value is used to decide about
> direct-complete. Why does it do that? Shouldn't pm core check
> the direct_complete flag during ->suspend if the device
> is in runtime suspend, to decide whether to skip runtime resume + ->suspend
> for *this* device?

direct_complete has nothing to do with this.

First off, the PM core does check the direct_complete flag in
__device_suspend() and does more-or-less what you are saying.

However, that flag is initialized in device_prepare() with the help of
the ->suspend() return value, because whether or not it makes sense to
set that flag depends on some conditions that may change between
consecutive system suspend-resume cycles in general and need to be
checked in advance before setting it.

HTH

Rafael

\
 
 \ /
  Last update: 2017-09-21 19:26    [W:0.096 / U:3.404 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site