Messages in this thread | | | From | matthew.gerlach@linux ... | Subject | [PATCH v2 0/3] Altera ASMI Parallel II IP Core | Date | Wed, 20 Sep 2017 11:28:56 -0700 |
| |
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
This patch set adds a spi-nor flash driver for the Altera ASMI Parallel II IP Core. This driver was created based on feedback from Marek Vasut, Cyrill Pitchen, and Michal Suchanek regarding Version 2 of the Altera Quadspi Controller: https://lkml.org/lkml/2017/6/26/518
The overall problem with Version 2 of the Altera Quadspi Controller and its driver was the fact that there was much duplication of code and logic with the spi-nor framework. This new combination of fpga hardware and software "gets out of the way" of the spi-nor framework. The result is a much simpler driver with the spi-nor framework performing the bulk of the work.
Patch 1 contains the device tree bindings for the driver for the Altera ASMI-Parallel II IP Core.
Patch 2 contains the driver code for the Altera ASMI-Parallel II IP Core. This driver supports being configured via a device tree or with platform data. In the later case, the memory for the registers has been remapped.
Patch 3 contains a work around for some non-standard behavior of EPCQ flash.
Matthew Gerlach (3): dt-bindings: mtd: Altera ASMI Parallel II IP Core mtd: spi-nor: Altera ASMI Parallel II IP Core mtd: spi-nor: add flag for reading dummy cycles from nv cfg reg
.../devicetree/bindings/mtd/altera-asmip2.txt | 15 + MAINTAINERS | 7 + drivers/mtd/spi-nor/Kconfig | 6 + drivers/mtd/spi-nor/Makefile | 1 + drivers/mtd/spi-nor/altera-asmip2.c | 478 +++++++++++++++++++++ include/linux/mtd/altera-asmip2.h | 27 ++ 6 files changed, 534 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/altera-asmip2.txt create mode 100644 drivers/mtd/spi-nor/altera-asmip2.c create mode 100644 include/linux/mtd/altera-asmip2.h
-- 2.7.4
| |