lkml.org 
[lkml]   [2017]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: dsa: use dedicated CPU port
Date
Each port in DSA has its own dedicated CPU port currently available in
its parent switch's ds->ports[port].cpu_dp. Use it instead of getting
the unique tree CPU port, which will be deprecated soon.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
drivers/net/dsa/b53/b53_common.c | 4 ++--
drivers/net/dsa/bcm_sf2.c | 6 +++---
drivers/net/dsa/mt7530.c | 4 ++--
drivers/net/dsa/mv88e6060.c | 2 +-
drivers/net/dsa/qca8k.c | 2 +-
5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a9f2a5b55a5e..d4ce092def83 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1336,7 +1336,7 @@ EXPORT_SYMBOL(b53_fdb_dump);
int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
u16 pvlan, reg;
unsigned int i;

@@ -1382,7 +1382,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
struct b53_vlan *vl = &dev->vlans[0];
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
unsigned int i;
u16 pvlan, reg, pvid;

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 0072a959db5b..898d5642b516 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -661,7 +661,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = ds->dst->cpu_dp->netdev;
+ struct net_device *p = ds->ports[port].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_wolinfo pwol;

@@ -684,9 +684,9 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = ds->dst->cpu_dp->netdev;
+ struct net_device *p = ds->ports[port].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- s8 cpu_port = ds->dst->cpu_dp->index;
+ s8 cpu_port = ds->ports[port].cpu_dp->index;
struct ethtool_wolinfo pwol;

p->ethtool_ops->get_wol(p, &pwol);
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index c142b97add2c..faa3b88d2206 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -928,11 +928,11 @@ mt7530_setup(struct dsa_switch *ds)
struct device_node *dn;
struct mt7530_dummy_poll p;

- /* The parent node of cpu_dp->netdev which holds the common system
+ /* The parent node of master netdev which holds the common system
* controller also is the container for two GMACs nodes representing
* as two netdev instances.
*/
- dn = ds->dst->cpu_dp->netdev->dev.of_node->parent;
+ dn = ds->ports[MT7530_CPU_PORT].netdev->dev.of_node->parent;
priv->ethernet = syscon_node_to_regmap(dn);
if (IS_ERR(priv->ethernet))
return PTR_ERR(priv->ethernet);
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index dce7fa57eb55..621cdc46ad81 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -176,7 +176,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(ds, p) ?
ds->enabled_port_mask :
- BIT(ds->dst->cpu_dp->index)));
+ BIT(ds->ports[p].cpu_dp->index)));

/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 5ada7a41449c..82f09711ac1a 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -506,7 +506,7 @@ qca8k_setup(struct dsa_switch *ds)
pr_warn("regmap initialization failed");

/* Initialize CPU port pad mode (xMII type, delays...) */
- phy_mode = of_get_phy_mode(ds->dst->cpu_dp->dn);
+ phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
if (phy_mode < 0) {
pr_err("Can't find phy-mode for master device\n");
return phy_mode;
--
2.14.1
\
 
 \ /
  Last update: 2017-09-20 18:32    [W:0.039 / U:6.312 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site