lkml.org 
[lkml]   [2017]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] openrisc: dts: or1ksim: Add stdout-path
Hi Geert,

On Tue, Sep 19, 2017 at 06:49:48PM +0200, Geert Uytterhoeven wrote:
> Hi Stafford,
>
> On Tue, Sep 19, 2017 at 4:00 PM, Stafford Horne <shorne@gmail.com> wrote:
> > During reviews of the OpenRISC SMP patch series it was suggested to add
> > stdout-path to the SMP dts file. Add stdout-path to our other dts files
> > to be a good example.
> >
> > Signed-off-by: Stafford Horne <shorne@gmail.com>
> > ---
> > arch/openrisc/boot/dts/or1ksim.dts | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/openrisc/boot/dts/or1ksim.dts b/arch/openrisc/boot/dts/or1ksim.dts
> > index 5d4f9027afaf..ecc30968cbcb 100644
> > --- a/arch/openrisc/boot/dts/or1ksim.dts
> > +++ b/arch/openrisc/boot/dts/or1ksim.dts
> > @@ -7,6 +7,7 @@
> >
> > chosen {
> > bootargs = "console=uart,mmio,0x90000000,115200";
> > + stdout-path = &serial0;
>
> I think that should be:
>
> - bootargs = "console=uart,mmio,0x90000000,115200";
> + stdout-path = "serial0:115200";
>
> If stdout-path is present, it will become the default console.
> All other UART parameters except for the serial speed are derived from
> the serial0 node (= serial@90000000) in DT.

Thanks for the tip. I have seen examples using alias `&serial0;` and using
the name directly `serio0:115200', but I guess I didnt really understand
what was going on. I read through as much of the console initialization,
of, earlycon and printk code as I needed to refresh my memory on this...

It seems there are a few other issues here:
- To use "serial0:115200" we will need an alias to the path (or specify
the full path)
- It looks like we can't use console= and stdout-path at the same time
- We still need "earlycon" to define that we want to initialize early
printk

I think updating to something like the below works, but its a few extra
lines:


diff --git a/arch/openrisc/boot/dts/or1ksim.dts b/arch/openrisc/boot/dts/or1ksim.dts
index ecc30968cbcb..37779a45947c 100644
--- a/arch/openrisc/boot/dts/or1ksim.dts
+++ b/arch/openrisc/boot/dts/or1ksim.dts
@@ -5,9 +5,13 @@
#size-cells = <1>;
interrupt-parent = <&pic>;

+ aliases {
+ uart0 = &serial0;
+ };
+
chosen {
- bootargs = "console=uart,mmio,0x90000000,115200";
- stdout-path = &serial0;
+ bootargs = "earlycon";
+ stdout-path = "uart0:115200";
};

memory@0 {

The boot prompt before showed:

Kernel command line: console=uart,mmio,0x90000000,115200
earlycon: uart0 at MMIO 0x90000000 (options '115200')
bootconsole [uart0] enabled
Now it shows:

Kernel command line: earlycon
earlycon: ns16550a0 at MMIO 0x90000000 (options '115200')
bootconsole [ns16550a0] enabled
-Stafford

\
 
 \ /
  Last update: 2017-09-20 16:05    [W:1.011 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site