lkml.org 
[lkml]   [2017]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [linux-sunxi] Re: [PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3
On Mon, Sep 18, 2017 at 03:47:25PM +0000, icenowy@aosc.io wrote:
> 在 2017-09-18 16:30,Maxime Ripard 写道:
> > On Mon, Sep 18, 2017 at 03:36:43PM +0800, Icenowy Zheng wrote:
> > > 于 2017年9月18日 GMT+08:00 下午3:33:36, Maxime Ripard
> > > <maxime.ripard@free-electrons.com> 写到:
> > > >On Thu, Sep 14, 2017 at 10:52:46PM +0800, Icenowy Zheng wrote:
> > > >> Allwinner H3 features a thermal sensor like the one in A33, but has
> > > >its
> > > >> register re-arranged, the clock divider moved to CCU (originally the
> > > >> clock divider is in ADC) and added a pair of bus clock and reset.
> > > >>
> > > >> Update the binding document to cover H3.
> > > >>
> > > >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> > > >> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> > > >> ---
> > > >> Changes in v4:
> > > >> - Add nvmem calibration data (not yet used by the driver)
> > > >> Changes in v3:
> > > >> - Clock name changes.
> > > >> - Example node name changes.
> > > >> - Add interupts (not yet used by the driver).
> > > >>
> > > >> .../devicetree/bindings/mfd/sun4i-gpadc.txt | 30
> > > >++++++++++++++++++++--
> > > >> 1 file changed, 28 insertions(+), 2 deletions(-)
> > > >>
> > > >> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >> index badff3611a98..6c470d584bf9 100644
> > > >> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> > > >> @@ -4,12 +4,26 @@ The Allwinner SoCs all have an ADC that can also
> > > >act as a thermal sensor
> > > >> and sometimes as a touchscreen controller.
> > > >>
> > > >> Required properties:
> > > >> - - compatible: "allwinner,sun8i-a33-ths",
> > > >> + - compatible: must contain one of the following compatibles:
> > > >> + - "allwinner,sun8i-a33-ths"
> > > >> + - "allwinner,sun8i-h3-ths"
> > > >> - reg: mmio address range of the chip,
> > > >> - #thermal-sensor-cells: shall be 0,
> > > >> - #io-channel-cells: shall be 0,
> > > >>
> > > >> -Example:
> > > >> +Optional properties:
> > > >> + - nvmem-cells: A phandle to the calibration data provided by a
> > > >nvmem device.
> > > >> + If unspecified default values shall be used.
> > > >> + - nvmem-cell-names: Should be "calibration-data"
> > > >
> > > >I'd prefer to have which sensor it applies to here. It wouldn't change
> > > >anything for the H3, but it definitely does for example for the A83t
> > > >that has two sensors, one for each cluster, and one for the GPU, each
> > > >with calibration data.
> > > >
> > > >What about cluster0-calibration?
>
> I prefer sensor0-calibration to sensor3-calibration now.
> (Theortically the new generation THS can support up to 4 sensors)

The mapping that explains what sensor0 means can change in the
future. It's better to be explicit here, and just say upfront what
it's about.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-09-20 09:53    [W:0.065 / U:66.220 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site