Messages in this thread | | | Date | Tue, 19 Sep 2017 22:11:40 +0200 | From | Boris Brezillon <> | Subject | Re: [DEBUG] mtd: spi-nor: dump DWORDs of the Basic Flash Parameter Table |
| |
On Thu, 14 Sep 2017 18:44:31 +0200 Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> wrote:
> Le 12/09/2017 à 15:12, Boris Brezillon a écrit : > > Hi Geert, > > > > On Mon, 11 Sep 2017 10:58:36 +0200 > > Geert Uytterhoeven <geert@linux-m68k.org> wrote: > > > >> Hi Cyrille, > >> > >> On Thu, Sep 7, 2017 at 9:28 PM, Cyrille Pitchen > >> <cyrille.pitchen@wedev4u.fr> wrote: > >>>> Can you apply this patch on your tree then report me what was printed, please? > >>>> I have an idea of the root cause of your issue then a potential work-around > >>>> but I first need to validate my assumption to confirm that the work-around > >>>> would actually work. > >> > >> +m25p80 spi0.0: DWORD1 = 0xffffffff > >> +m25p80 spi0.0: DWORD2 = 0xffffffff > >> +m25p80 spi0.0: DWORD3 = 0xffffffff > >> +m25p80 spi0.0: DWORD4 = 0xffffffff > >> +m25p80 spi0.0: DWORD5 = 0xffffffff > >> +m25p80 spi0.0: DWORD6 = 0xffffffff > >> +m25p80 spi0.0: DWORD7 = 0xffffffff > >> +m25p80 spi0.0: DWORD8 = 0xffffffff > >> +m25p80 spi0.0: DWORD9 = 0xffffffff > >> +m25p80 spi0.0: DWORD10 = 0x00000000 > >> +m25p80 spi0.0: DWORD11 = 0x00000000 > >> +m25p80 spi0.0: DWORD12 = 0x00000000 > >> +m25p80 spi0.0: DWORD13 = 0x00000000 > >> +m25p80 spi0.0: DWORD14 = 0x00000000 > >> +m25p80 spi0.0: DWORD15 = 0x00000000 > >> +m25p80 spi0.0: DWORD16 = 0x00000000 > >> +m25p80 spi0.0: BFPT version 1.0 (length = 9) > >> > >>> If you could also dump the value of the 'addr' argument of > >>> spi_nor_read_sfdp_dma_unsafe() just before the for () loop below in the > >>> very same function. Actually, I suspect the SFDP tables of your SPI NOR > >> > >> +m25p80 spi0.0: addr = 0x448 > >> > >>> memory sample to have been programmed with invalid values, neither > >>> compliant with the JEDEC JESD216 specification nor with the Cypress > >>> datasheet for this memory part. > >> > >> Sounds plausible. > >> I get the same values when disabling DMA, so it's not due to bad DMA handling. > >> All Renesas boards I have local or remote access to have spansion,s25fl512s. > > > > Can you try with the following patch? > > > > Thanks, > > > > Boris > > > > --->8--- > > From 000ff63fdb149d87d755483f5edc0aba010da6b4 Mon Sep 17 00:00:00 2001 > > From: Boris Brezillon <boris.brezillon@free-electrons.com> > > Date: Tue, 12 Sep 2017 15:10:35 +0200 > > Subject: [PATCH] mtd: spi-nor: Check consistency of the memory size extracted > > from the SFDP > > > > One field of the flash parameter table contains information about the > > flash device size. > > Most of the time the data extracted from this field is valid, but > > sometimes the BFPT section of the SFDP table is corrupted or invalid and > > this field is set to 0xffffffff, thus resulting in an integer overflow > > when setting params->size. > > > > Since NOR devices are anayway always smaller than 2^64 bytes, we can > > easily stop the BFPT parsing if the size reported in this table is > > invalid. > > > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Acked-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.com>
Applied after fixing the things you pointed below.
> > with few comments below: > > --- > > drivers/mtd/spi-nor/spi-nor.c | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > > index cf1d4a15e10a..665ccae1d090 100644 > > --- a/drivers/mtd/spi-nor/spi-nor.c > > +++ b/drivers/mtd/spi-nor/spi-nor.c > > @@ -2127,6 +2127,15 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, > > params->size = bfpt.dwords[BFPT_DWORD(2)]; > > if (params->size & BIT(31)) { > > params->size &= ~BIT(31); > > + > > + /* > > + * Prevent overflows on params->size. Anyway, a NOR of 1^64 > typo: should be 2^64 > > + * bytes is unlikely to exist so this error probably means > > Here the size is still expressed in bits, not yet in byte, the > conversion is done right after this chunk. > > + * the BFPT we are reading is corrupted/wrong. > > + */ > > + if (params->size > 63) > > + return -EINVAL; > > + > > params->size = 1ULL << params->size; > > } else { > > params->size++; > > > > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/
| |