lkml.org 
[lkml]   [2017]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RESEND PATCH 2/3] ARM: dts: keystone-k2g-evm: Enable PWM ECAP0
    Date
    Enable PWM ECAP0 which will be used for display backlight.

    Signed-off-by: Vignesh R <vigneshr@ti.com>
    ---
    arch/arm/boot/dts/keystone-k2g-evm.dts | 12 ++++++++++++
    1 file changed, 12 insertions(+)

    diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
    index f462f1043531..808618e747eb 100644
    --- a/arch/arm/boot/dts/keystone-k2g-evm.dts
    +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
    @@ -81,6 +81,12 @@
    K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
    >;
    };
    +
    + ecap0_pins: ecap0_pins {
    + pinctrl-single,pins = <
    + K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */
    + >;
    + };
    };

    &uart0 {
    @@ -112,3 +118,9 @@
    memory-region = <&dsp_common_memory>;
    status = "okay";
    };
    +
    +&ecap0 {
    + status = "okay";
    + pinctrl-names = "default";
    + pinctrl-0 = <&ecap0_pins>;
    +};
    --
    2.14.1
    \
     
     \ /
      Last update: 2017-09-19 08:17    [W:5.917 / U:0.112 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site