lkml.org 
[lkml]   [2017]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 06/14] irqchip: add initial support for ompic
On Thu, Sep 14, 2017 at 03:54:02PM +0900, Stafford Horne wrote:
> On Wed, Sep 13, 2017 at 06:21:39PM +0100, Marc Zyngier wrote:
> > On Sun, Sep 10 2017 at 3:49:18 pm BST, Stafford Horne <shorne@gmail.com> wrote:
> > > From: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> > >
> > > IPI driver for the Open Multi-Processor Interrupt Controller (ompic) as
> > > described in the Multicore support section of the OpenRISC 1.2
> > > proposed architecture specification:
> > >
> > > https://github.com/stffrdhrn/doc/raw/arch-1.2-proposal/openrisc-arch-1.2-rev0.pdf
> > >
> > > Each OpenRISC core contains a full interrupt controller which is used in
> > > the SMP architecture for interrupt balancing. This IPI device, the
> > > ompic, is the only external device required for enabling SMP on
> > > OpenRISC.
> > >
> > > Pending ops are stored in a memory bit mask which can allow multiple
> > > pending operations to be set and serviced at a time. This is mostly
> > > borrowed from the alpha IPI implementation.
> > >
> > > Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> > > [shorne@gmail.com: converted ops to bitmask, wrote commit message]
> > > Signed-off-by: Stafford Horne <shorne@gmail.com>
> > > ---
> > >
> > > Changes since v1
> > > - Added openrisc, prefix
> > > - Clarified 8 bytes per cpu
> > > - Removed #interrupt-cells as this will not be an irq parent
> > > - Changed ops to be percpu
> > > - Added DTS and intialization failure validations
> > >
> > > .../interrupt-controller/openrisc,ompic.txt | 19 ++
> > > arch/openrisc/Kconfig | 1 +
> > > drivers/irqchip/Kconfig | 3 +
> > > drivers/irqchip/Makefile | 1 +
> > > drivers/irqchip/irq-ompic.c | 205 +++++++++++++++++++++
> > > 5 files changed, 229 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
> > > create mode 100644 drivers/irqchip/irq-ompic.c
> > >
> > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
> > > new file mode 100644
> > > index 000000000000..346e6042d62f
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
> > > @@ -0,0 +1,19 @@
> > > +Open Multi-Processor Interrupt Controller
> > > +
> > > +Required properties:
> > > +
> > > +- compatible : This should be "openrisc,ompic"
> > > +- reg : Specifies base physical address and size of the register space. The
> > > + size is based on the number of cores the controller has been configured
> > > + to handle, this should be set to 8 bytes per cpu core.
> > > +- interrupt-controller : Identifies the node as an interrupt controller
> > > +- interrupts : Specifies the interrupt line to which the ompic is wired.
> > > +
> > > +Example:
> > > +
> > > +ompic: ompic {
> > > + compatible = "openrisc,ompic";
> > > + reg = <0x98000000 16>;
> > > + interrupt-controller;
> > > + interrupts = <1>;
> > > +};
> > > diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
> > > index b49acda5e8f4..34eb4e90f56c 100644
> > > --- a/arch/openrisc/Kconfig
> > > +++ b/arch/openrisc/Kconfig
> > > @@ -30,6 +30,7 @@ config OPENRISC
> > > select NO_BOOTMEM
> > > select ARCH_USE_QUEUED_SPINLOCKS
> > > select ARCH_USE_QUEUED_RWLOCKS
> > > + select OMPIC if SMP
> > >
> > > config CPU_BIG_ENDIAN
> > > def_bool y
> > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> > > index f1fd5f44d1d4..0e4c96c90b86 100644
> > > --- a/drivers/irqchip/Kconfig
> > > +++ b/drivers/irqchip/Kconfig
> > > @@ -145,6 +145,9 @@ config CLPS711X_IRQCHIP
> > > select SPARSE_IRQ
> > > default y
> > >
> > > +config OMPIC
> > > + bool
> > > +
> > > config OR1K_PIC
> > > bool
> > > select IRQ_DOMAIN
> > > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> > > index e88d856cc09c..123047d7a20d 100644
> > > --- a/drivers/irqchip/Makefile
> > > +++ b/drivers/irqchip/Makefile
> > > @@ -17,6 +17,7 @@ obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
> > > obj-$(CONFIG_METAG) += irq-metag-ext.o
> > > obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
> > > obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
> > > +obj-$(CONFIG_OMPIC) += irq-ompic.o
> > > obj-$(CONFIG_OR1K_PIC) += irq-or1k-pic.o
> > > obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
> > > obj-$(CONFIG_OMAP_IRQCHIP) += irq-omap-intc.o
> > > diff --git a/drivers/irqchip/irq-ompic.c b/drivers/irqchip/irq-ompic.c
> > > new file mode 100644
> > > index 000000000000..cd2616b6639b
> > > --- /dev/null
> > > +++ b/drivers/irqchip/irq-ompic.c
> > > @@ -0,0 +1,205 @@
> > > +/*
> > > + * Open Multi-Processor Interrupt Controller driver
> > > + *
> > > + * Copyright (C) 2014 Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
> > > + * Copyright (C) 2017 Stafford Horne <shorne@gmail.com>
> > > + *
> > > + * This file is licensed under the terms of the GNU General Public License
> > > + * version 2. This program is licensed "as is" without any warranty of any
> > > + * kind, whether express or implied.
> > > + *
> > > + * The ompic device handles IPI communication because cores in mulicore
> > > + * OpenRISC systems.
> >
> > Should the above read "between cores"?
>
> Yes, it should be, I am bad with these kind of typos.

And "multi-core"

\
 
 \ /
  Last update: 2017-09-18 22:30    [W:0.079 / U:2.448 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site