lkml.org 
[lkml]   [2017]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ARC: reset: introduce AXS10x reset driver
From
Date
On Thu, 2017-09-14 at 17:28 +0300, Eugeniy Paltsev wrote:
> ARC AXS10x boards support custom IP-block which allows to control
> reset signals of selected peripherals. For example DW GMAC, etc...
> This block is controlled via memory-mapped register (AKA CREG) which
> represents up-to 32 reset lines. This regiter is self-clearing so we
> don't need to deassert line after reset.
>
> As of today only the following lines are used:
>  - DW GMAC - line 5
>
> > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
> ---
> Changes v1 -> v2:
>   * The creg reset register is self-clearing so we don't need to clear it
>     manually. Fixed it.
>   * Use reset callback instead of assert/deassert pair.
>   * Rename reset node in documentation to "reset-controller" for consistency
>     with the other bindings.
>   * Use devm_reset_controller_register instead of reset_controller_register
>
> NOTE:
>     This driver couldn't be replaced by reset-simple driver as we mustn't
>     read from reset register or clear it.

Thanks, I've applied this patch to the reset/next branch.

regards
Philipp

\
 
 \ /
  Last update: 2017-09-18 14:07    [W:0.081 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site