lkml.org 
[lkml]   [2017]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 5/6] ARM: sun8i: h3: add support for the thermal sensor in H3
On Thu, Sep 14, 2017 at 10:52:50PM +0800, Icenowy Zheng wrote:
> As we have gained the support for the thermal sensor in H3, we can now
> add its device nodes to the device tree.
>
> Add them to the H3 device tree.
>
> The calibration data of the thermal sensor is still not added, as
> it's currently not used, and the SID node is not added yet.
>
> The H5 thermal sensor has some differences, and will be added furtherly.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
> ---
> Changes in v4:
> - Mention calibration data in commit message.
> Changes in v3:
> - Clock name changes.
> - Splited out thermal zone addition.
>
> arch/arm/boot/dts/sun8i-h3.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index b36f9f423c39..3220da3ad790 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -72,6 +72,23 @@
> };
> };
>
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&ths>;
> + };
> +
> + soc {
> + ths: thermal-sensor@1c25000 {
> + compatible = "allwinner,sun8i-h3-ths";
> + reg = <0x01c25000 0x100>;
> + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> + clock-names = "bus", "mod";
> + resets = <&ccu RST_BUS_THS>;
> + #thermal-sensor-cells = <0>;
> + #io-channel-cells = <0>;

You're missing your interrupt.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-09-18 10:26    [W:0.145 / U:2.280 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site