lkml.org 
[lkml]   [2017]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 1/2] ASoC: rt5514: Add devicetree binding support for rt5514-spi
Date
Add devicetree binding support for rt5514 spi dsp codec.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
---

Changes in v12: None
Changes in v11:
Use same compatible for rt5514-i2c & rt5514-spi.

Changes in v10:
Put rt5514-i2c doc & rt5514-spi doc together.

Changes in v9:
Address comments from Brian.

Documentation/devicetree/bindings/sound/rt5514.txt | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt
index 929ca6756b02..4f33b0d96afe 100644
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@@ -1,22 +1,27 @@
RT5514 audio CODEC

-This device supports I2C only.
+This device supports both I2C and SPI.

Required properties:

- compatible : "realtek,rt5514".

-- reg : The I2C address of the device.
+- reg : the I2C address of the device for I2C, the chip select
+ number for SPI.

Optional properties:

- clocks: The phandle of the master clock to the CODEC
- clock-names: Should be "mclk"

+- interrupt-parent: The phandle for the interrupt controller.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+ depends on the interrupt controller.
+
- realtek,dmic-init-delay-ms
- Set the DMIC initial delay (ms) to wait it ready.
+ Set the DMIC initial delay (ms) to wait it ready for I2C.

-Pins on the device (for linking into audio routes) for RT5514:
+Pins on the device (for linking into audio routes) for I2C:

* DMIC1L
* DMIC1R
--
2.11.0

\
 
 \ /
  Last update: 2017-09-19 04:56    [W:0.097 / U:0.484 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site