lkml.org 
[lkml]   [2017]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/9 v2] usb: usb251xb: Add USB2517i specific struct and IDs
Date
There are USB2517 and USB2517i hubs, which have almost the same
registers space as already supported USB251xbi series. The difference
it in DIDs and in few functions. This patch adds the USB2517/i data
structures to the driver, so it would have different setting depending
on the device discovered on i2c-bus.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
Documentation/devicetree/bindings/usb/usb251xb.txt | 3 ++-
drivers/usb/misc/usb251xb.c | 21 ++++++++++++++++++++-
2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 3957d4eda..1682d4087 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -6,7 +6,8 @@ Hi-Speed Controller.
Required properties :
- compatible : Should be "microchip,usb251xb" or one of the specific types:
"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
- "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
+ "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi",
+ "microchip,usb2517", "microchip,usb2517i"
- reset-gpios : Should specify the gpio for hub reset
- reg : I2C address on the selected bus (default is <0x2C>)

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 91f66d68b..96a8c20ac 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -38,6 +38,7 @@
#define USB251XB_DEF_PRODUCT_ID_12 0x2512 /* USB2512B/12Bi */
#define USB251XB_DEF_PRODUCT_ID_13 0x2513 /* USB2513B/13Bi */
#define USB251XB_DEF_PRODUCT_ID_14 0x2514 /* USB2514B/14Bi */
+#define USB251XB_DEF_PRODUCT_ID_17 0x2517 /* USB2517i */

#define USB251XB_ADDR_DEVICE_ID_LSB 0x04
#define USB251XB_ADDR_DEVICE_ID_MSB 0x05
@@ -82,7 +83,7 @@

#define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14
#define USB251XB_ADDR_PRODUCT_STRING 0x54
-#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi"
+#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i"

#define USB251XB_ADDR_SERIAL_STRING_LEN 0x15
#define USB251XB_ADDR_SERIAL_STRING 0x92
@@ -186,6 +187,16 @@ static const struct usb251xb_data usb2514bi_data = {
.product_str = "USB2514Bi",
};

+static const struct usb251xb_data usb2517_data = {
+ .product_id = 0x2517,
+ .product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+ .product_id = 0x2517,
+ .product_str = "USB2517i",
+};
+
static void usb251xb_reset(struct usb251xb *hub, int state)
{
if (!gpio_is_valid(hub->gpio_reset))
@@ -511,6 +522,12 @@ static const struct of_device_id usb251xb_of_match[] = {
.compatible = "microchip,usb2514bi",
.data = &usb2514bi_data,
}, {
+ .compatible = "microchip,usb2517",
+ .data = &usb2517_data,
+ }, {
+ .compatible = "microchip,usb2517i",
+ .data = &usb2517i_data,
+ }, {
/* sentinel */
}
};
@@ -574,6 +591,8 @@ static const struct i2c_device_id usb251xb_id[] = {
{ "usb2513bi", 0 },
{ "usb2514b", 0 },
{ "usb2514bi", 0 },
+ { "usb2517", 0 },
+ { "usb2517i", 0 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(i2c, usb251xb_id);
--
2.12.0
\
 
 \ /
  Last update: 2017-09-16 12:45    [W:0.225 / U:45.280 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site