lkml.org 
[lkml]   [2017]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: phy: Fix mask value write on gmii2rgmii converter speed register
Date
To clear Speed Selection in MDIO control register(0x10),
ie, clear bits 6 and 13 to zero while keeping other bits same.
Before AND operation,The Mask value has to be perform with bitwise NOT
operation (ie, ~ operator)

This patch clears current speed selection before writing the
new speed settings to gmii2rgmii converter

Fixes: f411a6160bd4 ("net: phy: Add gmiitorgmii converter support")

Signed-off-by: Fahad Kunnathadi <fahad.kunnathadi@dexceldesigns.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/phy/xilinx_gmii2rgmii.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
index d15dd39..2e5150b 100644
--- a/drivers/net/phy/xilinx_gmii2rgmii.c
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -44,7 +44,7 @@ static int xgmiitorgmii_read_status(struct phy_device *phydev)
priv->phy_drv->read_status(phydev);

val = mdiobus_read(phydev->mdio.bus, priv->addr, XILINX_GMII2RGMII_REG);
- val &= XILINX_GMII2RGMII_SPEED_MASK;
+ val &= ~XILINX_GMII2RGMII_SPEED_MASK;

if (phydev->speed == SPEED_1000)
val |= BMCR_SPEED1000;
--
1.9.1
\
 
 \ /
  Last update: 2017-09-15 08:33    [W:0.030 / U:3.548 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site