lkml.org 
[lkml]   [2017]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [DEBUG] mtd: spi-nor: dump DWORDs of the Basic Flash Parameter Table
From
Date
Le 12/09/2017 à 15:12, Boris Brezillon a écrit :
> Hi Geert,
>
> On Mon, 11 Sep 2017 10:58:36 +0200
> Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
>> Hi Cyrille,
>>
>> On Thu, Sep 7, 2017 at 9:28 PM, Cyrille Pitchen
>> <cyrille.pitchen@wedev4u.fr> wrote:
>>>> Can you apply this patch on your tree then report me what was printed, please?
>>>> I have an idea of the root cause of your issue then a potential work-around
>>>> but I first need to validate my assumption to confirm that the work-around
>>>> would actually work.
>>
>> +m25p80 spi0.0: DWORD1 = 0xffffffff
>> +m25p80 spi0.0: DWORD2 = 0xffffffff
>> +m25p80 spi0.0: DWORD3 = 0xffffffff
>> +m25p80 spi0.0: DWORD4 = 0xffffffff
>> +m25p80 spi0.0: DWORD5 = 0xffffffff
>> +m25p80 spi0.0: DWORD6 = 0xffffffff
>> +m25p80 spi0.0: DWORD7 = 0xffffffff
>> +m25p80 spi0.0: DWORD8 = 0xffffffff
>> +m25p80 spi0.0: DWORD9 = 0xffffffff
>> +m25p80 spi0.0: DWORD10 = 0x00000000
>> +m25p80 spi0.0: DWORD11 = 0x00000000
>> +m25p80 spi0.0: DWORD12 = 0x00000000
>> +m25p80 spi0.0: DWORD13 = 0x00000000
>> +m25p80 spi0.0: DWORD14 = 0x00000000
>> +m25p80 spi0.0: DWORD15 = 0x00000000
>> +m25p80 spi0.0: DWORD16 = 0x00000000
>> +m25p80 spi0.0: BFPT version 1.0 (length = 9)
>>
>>> If you could also dump the value of the 'addr' argument of
>>> spi_nor_read_sfdp_dma_unsafe() just before the for () loop below in the
>>> very same function. Actually, I suspect the SFDP tables of your SPI NOR
>>
>> +m25p80 spi0.0: addr = 0x448
>>
>>> memory sample to have been programmed with invalid values, neither
>>> compliant with the JEDEC JESD216 specification nor with the Cypress
>>> datasheet for this memory part.
>>
>> Sounds plausible.
>> I get the same values when disabling DMA, so it's not due to bad DMA handling.
>> All Renesas boards I have local or remote access to have spansion,s25fl512s.
>
> Can you try with the following patch?
>
> Thanks,
>
> Boris
>
> --->8---
> From 000ff63fdb149d87d755483f5edc0aba010da6b4 Mon Sep 17 00:00:00 2001
> From: Boris Brezillon <boris.brezillon@free-electrons.com>
> Date: Tue, 12 Sep 2017 15:10:35 +0200
> Subject: [PATCH] mtd: spi-nor: Check consistency of the memory size extracted
> from the SFDP
>
> One field of the flash parameter table contains information about the
> flash device size.
> Most of the time the data extracted from this field is valid, but
> sometimes the BFPT section of the SFDP table is corrupted or invalid and
> this field is set to 0xffffffff, thus resulting in an integer overflow
> when setting params->size.
>
> Since NOR devices are anayway always smaller than 2^64 bytes, we can
> easily stop the BFPT parsing if the size reported in this table is
> invalid.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.com>

with few comments below:
> ---
> drivers/mtd/spi-nor/spi-nor.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index cf1d4a15e10a..665ccae1d090 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2127,6 +2127,15 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
> params->size = bfpt.dwords[BFPT_DWORD(2)];
> if (params->size & BIT(31)) {
> params->size &= ~BIT(31);
> +
> + /*
> + * Prevent overflows on params->size. Anyway, a NOR of 1^64
typo: should be 2^64
> + * bytes is unlikely to exist so this error probably means

Here the size is still expressed in bits, not yet in byte, the
conversion is done right after this chunk.
> + * the BFPT we are reading is corrupted/wrong.
> + */
> + if (params->size > 63)
> + return -EINVAL;
> +
> params->size = 1ULL << params->size;
> } else {
> params->size++;
>

\
 
 \ /
  Last update: 2017-09-14 19:29    [W:0.101 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site