lkml.org 
[lkml]   [2017]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V8 06/14] mmc: block: Prepare CQE data
Date
Enhance mmc_blk_data_prep() to support CQE requests. That means adding
some things that for non-CQE requests would be encoded into the command
arguments - such as the block address, reliable-write flag, and data tag
flag. Also the request tag is needed to provide the command queue task id,
and a comment is added to explain the future possibility of defining a
priority.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/core/block.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 1ec5f0bc98d2..2424c7360687 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -1554,6 +1554,7 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
memset(brq, 0, sizeof(struct mmc_blk_request));

brq->mrq.data = &brq->data;
+ brq->mrq.tag = req->tag;

brq->stop.opcode = MMC_STOP_TRANSMISSION;
brq->stop.arg = 0;
@@ -1568,6 +1569,14 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,

brq->data.blksz = 512;
brq->data.blocks = blk_rq_sectors(req);
+ brq->data.blk_addr = blk_rq_pos(req);
+
+ /*
+ * The command queue supports 2 priorities: "high" (1) and "simple" (0).
+ * The eMMC will give "high" priority tasks priority over "simple"
+ * priority tasks. Here we always set "simple" priority by not setting
+ * MMC_DATA_PRIO.
+ */

/*
* The block layer doesn't support all sector count
@@ -1597,8 +1606,10 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
brq->data.blocks);
}

- if (do_rel_wr)
+ if (do_rel_wr) {
mmc_apply_rel_rw(brq, card, req);
+ brq->data.flags |= MMC_DATA_REL_WR;
+ }

/*
* Data tag is used only during writing meta data to speed
@@ -1610,6 +1621,9 @@ static void mmc_blk_data_prep(struct mmc_queue *mq, struct mmc_queue_req *mqrq,
((brq->data.blocks * brq->data.blksz) >=
card->ext_csd.data_tag_unit_size);

+ if (do_data_tag)
+ brq->data.flags |= MMC_DATA_DAT_TAG;
+
mmc_set_data_timeout(&brq->data, card);

brq->data.sg = mqrq->sg;
--
1.9.1
\
 
 \ /
  Last update: 2017-09-13 13:48    [W:0.180 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site