lkml.org 
[lkml]   [2017]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 6/6] iommu/arm-smmu-v3: Avoid ILLEGAL setting of STE.S1STALLD and CD.S
On Tue, Sep 05, 2017 at 01:54:19PM +0100, Jean-Philippe Brucker wrote:
> On 31/08/17 09:20, Yisheng Xie wrote:
> > It is ILLEGAL to set STE.S1STALLD if STALL_MODEL is not 0b00, which
> > means we should not disable stall mode if stall/terminate mode is not
> > configuable.
> >
> > Meanwhile, it is also ILLEGAL when STALL_MODEL==0b10 && CD.S==0 which
> > means if stall mode is force we should always set CD.S.
> >
> > This patch add ARM_SMMU_FEAT_TERMINATE feature bit for smmu, and use
> > TERMINATE feature checking to ensue above ILLEGAL cases from happening.
> >
> > Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
> > ---
> > drivers/iommu/arm-smmu-v3.c | 22 ++++++++++++++++------
> > 1 file changed, 16 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> > index dbda2eb..0745522 100644
> > --- a/drivers/iommu/arm-smmu-v3.c
> > +++ b/drivers/iommu/arm-smmu-v3.c
> > @@ -55,6 +55,7 @@
> > #define IDR0_STALL_MODEL_SHIFT 24
> > #define IDR0_STALL_MODEL_MASK 0x3
> > #define IDR0_STALL_MODEL_STALL (0 << IDR0_STALL_MODEL_SHIFT)
> > +#define IDR0_STALL_MODEL_NS (1 << IDR0_STALL_MODEL_SHIFT)
> > #define IDR0_STALL_MODEL_FORCE (2 << IDR0_STALL_MODEL_SHIFT)
> > #define IDR0_TTENDIAN_SHIFT 21
> > #define IDR0_TTENDIAN_MASK 0x3
> > @@ -766,6 +767,7 @@ struct arm_smmu_device {
> > #define ARM_SMMU_FEAT_SVM (1 << 15)
> > #define ARM_SMMU_FEAT_HA (1 << 16)
> > #define ARM_SMMU_FEAT_HD (1 << 17)
> > +#define ARM_SMMU_FEAT_TERMINATE (1 << 18)
>
> I'd rather introduce something like "ARM_SMMU_FEAT_STALL_FORCE" instead.
> Terminate model has another meaning, and is defined by a different bit in
> IDR0.

Yes. What we need to do is:

- If STALL_MODEL is 0b00, then set S1STALLD
- If STALL_MODEL is 0b01, then we're ok (in future, avoiding trying to use
stalls, even for masters that claim to support it)
- If STALL_MODEL is 0b10, then force all PCI devices and any platform
devices that don't claim to support stalls into bypass (depending on
disable_bypass).

Reasonable? We could actually knock up a fix for mainline to do most of
this already.

Will

\
 
 \ /
  Last update: 2017-09-13 05:07    [W:0.156 / U:0.796 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site