[lkml]   [2017]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subjectmmc: mediatek: add support of mt2701/mt2712
  This serial of patches are adding support of mt2701/mt2712.
there are many changes and HW improvement between mt8173 and
mt2701/mt2712, below is a list of these changes:
1. enlarge CLKDIV bits from 8 to 12
2. remove the PAD_TUNE register and add a new PAD_TUNE0 register
3. add data sync and async fifo feature
4. add busy_check feature
5. add stop_clk fix
6. add enhance_rx support
7. add a seperate CG of source clock

mt2712 supports full of these features, mt2701 supports part of it, and
add a "mediatek,latch-ck" to work-around as it do not support stop-clk

Note: As Pinctrl/CCF are not ready now, so that current patches do not
include DTS part.

Chaotian Jing (12):
mmc: dt-bindings: update Mediatek MMC bindings
arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes
mmc: mediatek: add support of mt2701/mt2712
mmc: mediatek: make hs400_tune_response only for mt8173
mmc: mediatek: add pad_tune0 support
mmc: mediatek: add async fifo and data tune support
mmc: mediatek: add busy_check support
mmc: mediatek: add stop_clk fix and enhance_rx support
mmc: mediatek: add support of source_cg clock
mmc: mediatek: add latch-ck support
mmc: mediatek: improve eMMC hs400 mode read performance
mmc: mediatek: perfer to use rise edge latching for cmd line

Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +-
drivers/mmc/host/mtk-sd.c | 298 ++++++++++++++++++++---
3 files changed, 275 insertions(+), 48 deletions(-)


 \ /
  Last update: 2017-09-12 11:13    [W:0.093 / U:2.316 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site