Messages in this thread Patch in this message | | | From | Jagan Teki <> | Subject | [PATCH v4 5/6] ARM: dts: imx6dl-icore: Add touchscreen node | Date | Mon, 11 Sep 2017 14:42:24 +0530 |
| |
From: Jagan Teki <jagan@amarulasolutions.com>
max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is connected via i2c1, so add max11801: touchscreen@48 on i2c1.
Cc: Shawn Guo <shawnguo@kernel.org> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v4, v3,v2: - none
arch/arm/boot/dts/imx6dl-icore.dts | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts index 360c32e..35211f3 100644 --- a/arch/arm/boot/dts/imx6dl-icore.dts +++ b/arch/arm/boot/dts/imx6dl-icore.dts @@ -58,6 +58,15 @@ status = "okay"; }; +&i2c1 { + max11801: touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &ldb { status = "okay"; -- 2.7.4
| |