lkml.org 
[lkml]   [2017]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: usb/gadget: stalls in dummy_timer
On Mon, Sep 11, 2017 at 8:15 AM, Andrey Konovalov <andreyknvl@google.com> wrote:
> On Mon, Sep 11, 2017 at 3:25 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>> On Mon, 11 Sep 2017, Andrey Konovalov wrote:
>>
>>> Hi!
>>>
>>> I've been getting stall reports like this one while fuzzing the USB
>>> stack with gadgetfs. I'm wondering whether this is a bug in gadgetfs
>>> or is this report induced by the changes I've made to the USB core
>>> code. I didn't touch gadgetfs code though (except for adding a few
>>> printk's).
>>>
>>> I'm on commit 81a84ad3cb5711cec79f4dd53a4ce026b092c432
>>
>> It's possible that this was caused by commit f16443a034c7 ("USB:
>> gadgetfs, dummy-hcd, net2280: fix locking for callbacks"). I've been
>> meaning to repair the commit but haven't done it yet.
>>
>> Can you test with that commit reverted? You may end up seeing other
>> problems instead -- the ones that commit was intended to solve -- but
>> perhaps the stalls won't occur.
>
> So I've reverted both: the changes I made to USB core and the commit
> you mentioned, still saw the stalls.
>
> I've manged to find a way to reproduce this and now I'm not sure the
> problem is actually in gadgetfs, it might be the usbtouchscreen
> driver.
>
> The crash log is below.
>
> Thanks!
>
> gadgetfs: bound to dummy_udc driver
> usb 1-1: new full-speed USB device number 2 using dummy_hcd
> gadgetfs: connected
> gadgetfs: disconnected
> gadgetfs: connected
> usb 1-1: config 8 interface 0 altsetting 9 endpoint 0x8F has an
> invalid bInterval 0, changing to 10
> usb 1-1: config 8 interface 0 altsetting 9 endpoint 0x8F has invalid
> maxpacket 839, setting to 64
> usb 1-1: config 8 interface 0 altsetting 9 endpoint 0x7 has invalid
> maxpacket 1839, setting to 64
> usb 1-1: config 8 interface 0 has no altsetting 0
> usb 1-1: New USB device found, idVendor=0403, idProduct=f9e9
> usb 1-1: New USB device strings: Mfr=4, Product=8, SerialNumber=255
> usb 1-1: Product: a
> usb 1-1: Manufacturer: a
> usb 1-1: SerialNumber: a
> gadgetfs: configuration #8
> input: a a as /devices/platform/dummy_hcd.0/usb1/1-1/1-1:8.0/input/input8
> evbug: Connected device: input8 (a a at usb-dummy_hcd.0-1/input0)
> kworker/0:0: page allocation failure: order:0,
> mode:0x1280020(GFP_ATOMIC|__GFP_NOTRACK), nodemask=(null)
> kworker/0:0 cpuset=/ mems_allowed=0

It seems you are running out of memory.

> Swap cache stats: add 0, delete 0, find 0/0
> Free swap = 0kB
> Total swap = 0kB

And no swap. I think you need to give the box a bit more memory (or
there might be a leak somewhere).

Thanks.

--
Dmitry

\
 
 \ /
  Last update: 2017-09-11 20:54    [W:0.077 / U:0.404 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site