lkml.org 
[lkml]   [2017]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 01/10] spi-nor: intel-spi: Fix number of protected range registers for BYT/LPT
Date
The number of protected range registers is not the same on BYT/LPT/
BXT. GPR0 only exists on Apollo Lake and its offset is reserved on
other platforms.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---

Changes in v2: None

drivers/mtd/spi-nor/intel-spi.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
index 8a596bf..e5b52e8 100644
--- a/drivers/mtd/spi-nor/intel-spi.c
+++ b/drivers/mtd/spi-nor/intel-spi.c
@@ -67,8 +67,6 @@
#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT)
#define PR_RPE BIT(15)
#define PR_BASE_MASK 0x3fff
-/* Last PR is GPR0 */
-#define PR_NUM (5 + 1)

/* Offsets are from @ispi->sregs */
#define SSFSTS_CTL 0x00
@@ -96,14 +94,17 @@
#define BYT_BCR 0xfc
#define BYT_BCR_WPD BIT(0)
#define BYT_FREG_NUM 5
+#define BYT_PR_NUM 5

#define LPT_PR 0x74
#define LPT_SSFSTS_CTL 0x90
#define LPT_FREG_NUM 5
+#define LPT_PR_NUM 5

#define BXT_PR 0x84
#define BXT_SSFSTS_CTL 0xa0
#define BXT_FREG_NUM 12
+#define BXT_PR_NUM 6

#define INTEL_SPI_TIMEOUT 5000 /* ms */
#define INTEL_SPI_FIFO_SZ 64
@@ -117,6 +118,7 @@
* @pregs: Start of protection registers
* @sregs: Start of software sequencer registers
* @nregions: Maximum number of regions
+ * @pr_num: Maximum number of protected range registers
* @writeable: Is the chip writeable
* @swseq: Use SW sequencer in register reads/writes
* @erase_64k: 64k erase supported
@@ -132,6 +134,7 @@ struct intel_spi {
void __iomem *pregs;
void __iomem *sregs;
size_t nregions;
+ size_t pr_num;
bool writeable;
bool swseq;
bool erase_64k;
@@ -167,7 +170,7 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
for (i = 0; i < ispi->nregions; i++)
dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
readl(ispi->base + FREG(i)));
- for (i = 0; i < PR_NUM; i++)
+ for (i = 0; i < ispi->pr_num; i++)
dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
readl(ispi->pregs + PR(i)));

@@ -182,7 +185,7 @@ static void intel_spi_dump_regs(struct intel_spi *ispi)
dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));

dev_dbg(ispi->dev, "Protected regions:\n");
- for (i = 0; i < PR_NUM; i++) {
+ for (i = 0; i < ispi->pr_num; i++) {
u32 base, limit;

value = readl(ispi->pregs + PR(i));
@@ -286,6 +289,7 @@ static int intel_spi_init(struct intel_spi *ispi)
ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
ispi->pregs = ispi->base + BYT_PR;
ispi->nregions = BYT_FREG_NUM;
+ ispi->pr_num = BYT_PR_NUM;

if (writeable) {
/* Disable write protection */
@@ -305,12 +309,14 @@ static int intel_spi_init(struct intel_spi *ispi)
ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
ispi->pregs = ispi->base + LPT_PR;
ispi->nregions = LPT_FREG_NUM;
+ ispi->pr_num = LPT_PR_NUM;
break;

case INTEL_SPI_BXT:
ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
ispi->pregs = ispi->base + BXT_PR;
ispi->nregions = BXT_FREG_NUM;
+ ispi->pr_num = BXT_PR_NUM;
ispi->erase_64k = true;
break;

@@ -652,7 +658,7 @@ static bool intel_spi_is_protected(const struct intel_spi *ispi,
{
int i;

- for (i = 0; i < PR_NUM; i++) {
+ for (i = 0; i < ispi->pr_num; i++) {
u32 pr_base, pr_limit, pr_value;

pr_value = readl(ispi->pregs + PR(i));
--
2.9.2
\
 
 \ /
  Last update: 2017-09-11 11:40    [W:0.178 / U:1.300 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site