[lkml]   [2017]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/4] arm64: Add initial Actions Semi S700 and CubieBoard7 support

This series prepares the Actions Semi S700 SoC and Cubietech CubieBoard7.
It boots equally far as the S900 based Bubblegum-96 these patches are based on,
i.e. into an initrd with serial and all four cores up.

I have not yet managed to download the CubieBoard7 sources from Baidu, and the
Mega download has not yet been fixed, so this is based on the S700 datasheet
and /proc/device-tree/ from the preinstalled Android.

Lacking sources and instructions to replace the bootloader on eMMC or to try
booting from SD, the only working way I've found to boot mainline kernels
appears to be booting into Android, then issuing "reboot bootloader". U-Boot
is lacking the saveenv command, so it wasn't possible to change the bootdelay
to facilitate this.


Work branch:

Have a lot of fun!


Cc: Ahha Lee <>

Cc: Daniel Lezcano <>
Cc: Thomas Gleixner <>

Andreas Färber (4):
dt-bindings: arm: actions: Add S700 and CubieBoard7
dt-bindings: timer: Add Actions Semi S700
clocksource: owl: Prepare S700
arm64: dts: actions: Add S700 and CubieBoard7

Documentation/devicetree/bindings/arm/actions.txt | 15 ++
.../bindings/timer/actions,owl-timer.txt | 1 +
arch/arm64/boot/dts/actions/Makefile | 2 +
arch/arm64/boot/dts/actions/s700-cubieboard7.dts | 47 ++++++
arch/arm64/boot/dts/actions/s700.dtsi | 164 +++++++++++++++++++++
drivers/clocksource/owl-timer.c | 1 +
6 files changed, 230 insertions(+)
create mode 100644 arch/arm64/boot/dts/actions/s700-cubieboard7.dts
create mode 100644 arch/arm64/boot/dts/actions/s700.dtsi


 \ /
  Last update: 2017-09-11 04:24    [W:0.059 / U:1.348 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site