lkml.org 
[lkml]   [2017]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 02/13] thermal/drivers/hisi: Remove the multiple sensors support
Hi Daniel,

On Wed, Aug 30, 2017 at 10:47:26AM +0200, Daniel Lezcano wrote:
> By essence, the tsensor does not really support multiple sensor at the same
> time. It allows to set a sensor and use it to get the temperature, another
> sensor could be switched but with a delay of 3-5ms. It is difficult to read
> simultaneously several sensors without a big delay.
>
> Today, just one sensor is used, it is not necessary to deal with multiple
> sensors in the code. Remove them and if it is needed in the future add them
> on top of a code which will be clean up in the meantime.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
> drivers/thermal/hisi_thermal.c | 77 +++++++++++-------------------------------
> 1 file changed, 20 insertions(+), 57 deletions(-)
>
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index 8381696..92b6889 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -39,6 +39,7 @@
> #define HISI_TEMP_RESET (100000)
>
> #define HISI_MAX_SENSORS 4
> +#define HISI_DEFAULT_SENSOR 2

So if we always set the sensor id 2 as default sensor, that means it's
pointless to bind sensor id in dts. E.g. I change to bind thermal
sensor 0, then it's impossible to bind successfully:

- thermal-sensors = <&tsensor 2>;
+ thermal-sensors = <&tsensor 0>;

It's okay for this change, do you think we need reflect this in DT
binding doc [1] ?

[1] Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt

> struct hisi_thermal_sensor {
> struct hisi_thermal_data *thermal;
> @@ -53,11 +54,10 @@ struct hisi_thermal_data {
> struct mutex thermal_lock; /* protects register data */
> struct platform_device *pdev;
> struct clk *clk;
> - struct hisi_thermal_sensor sensors[HISI_MAX_SENSORS];
> -
> - int irq, irq_bind_sensor;
> + struct hisi_thermal_sensor sensors;
> + int irq;
> bool irq_enabled;
> -
> +

Repots whitespace error when I apply patch.

> void __iomem *regs;
> };
>
> @@ -113,7 +113,7 @@ static void hisi_thermal_enable_bind_irq_sensor
>
> mutex_lock(&data->thermal_lock);
>
> - sensor = &data->sensors[data->irq_bind_sensor];
> + sensor = &data->sensors;
>
> /* setting the hdak time */
> writel(0x0, data->regs + TEMP0_CFG);
> @@ -160,31 +160,8 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
> struct hisi_thermal_sensor *sensor = _sensor;
> struct hisi_thermal_data *data = sensor->thermal;
>
> - int sensor_id = -1, i;
> - long max_temp = 0;
> -
> *temp = hisi_thermal_get_sensor_temp(data, sensor);
>
> - sensor->sensor_temp = *temp;
> -
> - for (i = 0; i < HISI_MAX_SENSORS; i++) {
> - if (!data->sensors[i].tzd)
> - continue;
> -
> - if (data->sensors[i].sensor_temp >= max_temp) {
> - max_temp = data->sensors[i].sensor_temp;
> - sensor_id = i;
> - }
> - }
> -
> - /* If no sensor has been enabled, then skip to enable irq */
> - if (sensor_id == -1)
> - return 0;
> -
> - mutex_lock(&data->thermal_lock);
> - data->irq_bind_sensor = sensor_id;
> - mutex_unlock(&data->thermal_lock);
> -
> dev_dbg(&data->pdev->dev, "id=%d, irq=%d, temp=%d, thres=%d\n",
> sensor->id, data->irq_enabled, *temp, sensor->thres_temp);
> /*
> @@ -197,7 +174,7 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
> return 0;
> }
>
> - if (max_temp < sensor->thres_temp) {
> + if (*temp < sensor->thres_temp) {
> data->irq_enabled = true;
> hisi_thermal_enable_bind_irq_sensor(data);
> enable_irq(data->irq);
> @@ -224,22 +201,16 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
> {
> struct hisi_thermal_data *data = dev;
> struct hisi_thermal_sensor *sensor;
> - int i;
>
> mutex_lock(&data->thermal_lock);
> - sensor = &data->sensors[data->irq_bind_sensor];
> + sensor = &data->sensors;
>
> dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n",
> sensor->thres_temp / 1000);
> mutex_unlock(&data->thermal_lock);
>
> - for (i = 0; i < HISI_MAX_SENSORS; i++) {
> - if (!data->sensors[i].tzd)
> - continue;
> -
> - thermal_zone_device_update(data->sensors[i].tzd,
> - THERMAL_EVENT_UNSPECIFIED);
> - }
> + thermal_zone_device_update(data->sensors.tzd,
> + THERMAL_EVENT_UNSPECIFIED);
>
> return IRQ_HANDLED;
> }
> @@ -296,7 +267,6 @@ static int hisi_thermal_probe(struct platform_device *pdev)
> {
> struct hisi_thermal_data *data;
> struct resource *res;
> - int i;
> int ret;
>
> data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> @@ -347,16 +317,17 @@ static int hisi_thermal_probe(struct platform_device *pdev)
> hisi_thermal_enable_bind_irq_sensor(data);
> data->irq_enabled = true;
>
> - for (i = 0; i < HISI_MAX_SENSORS; ++i) {
> - ret = hisi_thermal_register_sensor(pdev, data,
> - &data->sensors[i], i);
> - if (ret)
> - dev_err(&pdev->dev,
> - "failed to register thermal sensor: %d\n", ret);
> - else
> - hisi_thermal_toggle_sensor(&data->sensors[i], true);
> + ret = hisi_thermal_register_sensor(pdev, data,
> + &data->sensors,
> + HISI_DEFAULT_SENSOR);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register thermal sensor: %d\n",
> + ret);
> + return ret;
> }
>
> + hisi_thermal_toggle_sensor(&data->sensors, true);
> +
> enable_irq(data->irq);
>
> return 0;
> @@ -365,17 +336,9 @@ static int hisi_thermal_probe(struct platform_device *pdev)
> static int hisi_thermal_remove(struct platform_device *pdev)
> {
> struct hisi_thermal_data *data = platform_get_drvdata(pdev);
> - int i;
> -
> - for (i = 0; i < HISI_MAX_SENSORS; i++) {
> - struct hisi_thermal_sensor *sensor = &data->sensors[i];
> -
> - if (!sensor->tzd)
> - continue;
> -
> - hisi_thermal_toggle_sensor(sensor, false);
> - }
> + struct hisi_thermal_sensor *sensor = &data->sensors;
>
> + hisi_thermal_toggle_sensor(sensor, false);
> hisi_thermal_disable_sensor(data);
> clk_disable_unprepare(data->clk);
>
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2017-09-01 16:06    [W:0.170 / U:0.852 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site