lkml.org 
[lkml]   [2017]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] ARM: dts: sun8i: h3: Enable AP6212 BT on uart3 on Nanopi M1 Plus
On Wed, Aug 30, 2017 at 05:01:10AM +0200, Philipp Rossak wrote:
> From: Philipp Rossak <embed3d@gmail.com>
>
> The BT side of the AP6212 WiFi/BT combo module is connected to
> uart3.
>
> Enable BT on this board by enabling uart3 with using additionally
> the cts and rts pins.
>
> Signed-off-by: Philipp Rossak <embed3d@gmail.com>

I've queued this patch for 4.15, but...

> ---
> arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 3054308..8c12419 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -49,6 +49,7 @@
> aliases {
> ethernet0 = &emac;
> ethernet1 = &ap6212;
> + serial1 = &uart3;

You'll also need an alias for serial 0 here. Can you send a follow up
patch to do so?

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-09-01 15:01    [W:0.090 / U:4.412 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site