lkml.org 
[lkml]   [2017]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 2/6] phy: qcom-qmp: Power-on PHY before initialization
From
Date


On 7/21/2017 4:31 PM, Manu Gautam wrote:
> }
> @@ -729,19 +771,17 @@ static int qcom_qmp_phy_init(struct phy *phy)
> void __iomem *pcs = qphy->pcs;
> void __iomem *status;
> unsigned int mask, val;
> - int ret, i;
> + int ret;
>
> dev_vdbg(qmp->dev, "Initializing QMP phy\n");
>
> - for (i = 0; i < qmp->cfg->num_clks; i++) {
> - ret = clk_prepare_enable(qmp->clks[i]);
> - if (ret) {
> - dev_err(qmp->dev, "failed to enable %s clk, err=%d\n",
> - qmp->cfg->clk_list[i], ret);
> - while (--i >= 0)
> - clk_disable_unprepare(qmp->clks[i]);
> - }
> - }
> + ret = qcom_qmp_phy_poweron(qmp);
> + if (ret)
> + return ret;
> +
> + ret = qcom_qmp_phy_enable_clocks(qmp);
> + if (ret)
> + goto err_clk_enable;
>
> ret = qcom_qmp_phy_com_init(qmp);

In next version I will move poweron and clock_enable to com_init
as PCI QMP PHY might use multiple PHY instances (for each lane) each of
them will call phy_init/exit.
qcom_qmp_phy_com_init executed only once, hence better
suited for turning ON clocks/regulators.

> if (ret)
> @@ -801,8 +841,9 @@ static int qcom_qmp_phy_init(struct phy *phy)
> err_lane_rst:
> qcom_qmp_phy_com_exit(qmp);
> err_com_init:
> - while (--i >= 0)
> - clk_disable_unprepare(qmp->clks[i]);
> + qcom_qmp_phy_disable_clocks(qmp);
> +err_clk_enable:
> + qcom_qmp_phy_poweroff(qmp);
>
> return ret;
> }
> @@ -812,7 +853,6 @@ static int qcom_qmp_phy_exit(struct phy *phy)
> struct qmp_phy *qphy = phy_get_drvdata(phy);
> struct qcom_qmp *qmp = qphy->qmp;
> const struct qmp_phy_cfg *cfg = qmp->cfg;
> - int i = cfg->num_clks;
>
> clk_disable_unprepare(qphy->pipe_clk);
>
> @@ -830,8 +870,9 @@ static int qcom_qmp_phy_exit(struct phy *phy)
>
> qcom_qmp_phy_com_exit(qmp);
>
> - while (--i >= 0)
> - clk_disable_unprepare(qmp->clks[i]);
> + qcom_qmp_phy_disable_clocks(qmp);
> +
> + qcom_qmp_phy_poweroff(qmp);

On similar lines will be moving these to qcom_qmp_phy_com_exit().
>
> return 0;
> }
> @@ -958,8 +999,6 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, int id)
> static const struct phy_ops qcom_qmp_phy_gen_ops = {
> .init = qcom_qmp_phy_init,
> .exit = qcom_qmp_phy_exit,
> - .power_on = qcom_qmp_phy_poweron,
> - .power_off = qcom_qmp_phy_poweroff,
> .owner = THIS_MODULE,
> };
>

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2017-08-09 12:52    [W:0.044 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site