lkml.org 
[lkml]   [2017]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
Date
The display engine on Allwinner A64 wants to claim the SRAM C section.

Add a SRAM controller compatible for A64, and a SRAM section compatible
for its SRAM C.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Documentation/devicetree/bindings/sram/sunxi-sram.txt | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index 8d5665468fe7..f34b3a553d7c 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -9,7 +9,9 @@ Controller Node
---------------

Required properties:
-- compatible : "allwinner,sun4i-a10-sram-controller"
+- compatible : should be:
+ - "allwinner,sun4i-a10-sram-controller"
+ - "allwinner,sun50i-a64-sram-controller"
- reg : sram controller register offset + length

SRAM nodes
@@ -22,10 +24,13 @@ Each SRAM will have SRAM sections that are going to be handled by the
SRAM controller as subnodes. These sections are represented following
once again the representation described in the mmio-sram binding.

-The valid sections compatible are:
+The valid sections compatible for A10 are:
- allwinner,sun4i-a10-sram-a3-a4
- allwinner,sun4i-a10-sram-d

+The valid sections compatible for A64 are:
+ - allwinner,sun50i-a64-sram-c
+
Devices using SRAM sections
---------------------------

--
2.13.0
\
 
 \ /
  Last update: 2017-08-09 10:58    [W:0.111 / U:25.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site