lkml.org 
[lkml]   [2017]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/18] staging: typec: fusb302: Use client->irq as irq if set
Date
The fusb302 is also used on x86 systems where the platform code sets
the irq in client->irq and there is no gpio named fcs,int_n.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/staging/typec/fusb302/fusb302.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index 8ceaef8ecf17..be454b5ff6c7 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1735,9 +1735,13 @@ static int fusb302_probe(struct i2c_client *client,
goto destroy_workqueue;
}

- ret = init_gpio(chip);
- if (ret < 0)
- goto destroy_workqueue;
+ if (client->irq) {
+ chip->gpio_int_n_irq = client->irq;
+ } else {
+ ret = init_gpio(chip);
+ if (ret < 0)
+ goto destroy_workqueue;
+ }

chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
if (IS_ERR(chip->tcpm_port)) {
--
2.13.3
\
 
 \ /
  Last update: 2017-08-06 14:40    [W:2.025 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site