lkml.org 
[lkml]   [2017]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/14] mmc: meson-gx: driver fixups and upgrade
Date
The patchset features several bugfixes, rework and upgrade for the
meson-gx MMC driver.

The main goal is to improve readability and enable new high speed
modes, such as eMMC DDR52 and sdcard UHS modes up to SDR50 (100Mhz)

While full speed SDR104 is stable with most cards, a few seems to
require an even more precise tuning. For this, we'll probably have
to implement per-line delay calibration.

This series has been tested on gxbb-p200, gxbb-nanopi-k2 and
gxl-s905x-libretech

Jerome Brunet (14):
mmc: meson-gx: fix mux mask definition
mmc: meson-gx: remove CLK_DIVIDER_ALLOW_ZERO clock flag
mmc: meson-gx: clean up some constants
mmc: meson-gx: use _irqsave variant of spinlock
mmc: meson-gx: cfg init overwrite values
mmc: meson-gx: rework set_ios function
mmc: meson-gx: rework clk_set function
mmc: meson-gx: rework clock init function
mmc: meson-gx: simplify interrupt handler
mmc: meson-gx: implement card_busy callback
mmc: meson-gx: rework tuning function
mmc: meson-gx: fix dual data rate mode frequencies
mmc: meson-gx: work around clk-stop issue
mmc: meson-gx: implement voltage switch callback

drivers/mmc/host/meson-gx-mmc.c | 611 ++++++++++++++++++++++++++--------------
1 file changed, 396 insertions(+), 215 deletions(-)

--
2.9.4

\
 
 \ /
  Last update: 2017-08-04 19:44    [W:0.141 / U:2.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site